| Energy efficiency | ENEFF (CN) / Class 1 | ||
| Mean time to failure (MTTF), subcomponent | 190 years, rotor position sensor | ||
| Mass moment of inertia of brake | 12,5 kgcm² | ||
| DC brake response delay | 10 ms | ||
| Brake separation time | 200 ms | ||
| Brake current consumption | 1,08 A | ||
| Brake holding torque | 65 Nm | ||
| Rotor position transducer resolution | 19 bit | ||
| rotor position sensor, DC operating voltage range | 3,6 V ... 14 V | ||
| Rotor position sensor, encoder measuring principle | Inductive | ||
| rotor position sensor, absolute detectable revolutions | 1 | ||
| Rotor position sensor | Absolute single-turn encoder | ||
| Permissible axial shaft load | 346 N | ||
| Total mass moment of inertia of output | 70,1 kgcm² | ||
| Thermal resistance | 0,42 K/W | ||
| Electric time constant | 15,6 ms | ||
| Winding longitudinal inductivity Ld (phase) | 7,95 mH | ||
| Phase-phase winding resistance | 1,016 Ohm | ||
| Standstill torque constant | 4,38 Nm/A | ||
| Peak current | 24 A | ||
| Continuous stall current | 11,4 A | ||
| Max. mechanical speed | 8.000 rpm | ||
| Nominal rotary speed | 1.000 rpm | ||
| Nenn-Anziehdrehmoment | 39,7 Nm | ||
| Number of pole pairs | 5 | ||
| Nennbetriebsspannung DC | 680 V | ||
| CE-Zeichen (siehe Konformitätserklärung) | To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
| Schockfestigkeit | As per EN 60068-2-29 15 g/11 ms to EN 60068-2-27 | ||
| LABS-Konformität | VDMA24364 zone III | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Elektrischer Anschluss 1, Anschlussbild | 00995913 | ||
| Elektrischer Anschluss 1, Anschlusstechnik | M23x1 | ||
| Interface code, motor out | 150A | ||
| Storage lifetime under nominal conditions | 20.000 h | ||
| Balance quality | G 2.5 | ||
| Hinweis zur Schutzart | IP21 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components | ||
| Einbaulage | optional | ||
| Temperature monitoring | Digital motor temperature transmission via EnDat® 2.2 | ||
| Max. winding temperature | 155 °C | ||
| Entspricht Norm | IEC 60034 | ||
| Lagertemperatur | -20 °C ... 70 °C | ||
| Max. installation height | 4.000 m | ||
| Umgebungstemperatur | -15 °C ... 40 °C |
| Mean time to dangerous failure (MTTFd), subcomponent | 380 years, rotor position sensor | ||
| Switching cycles holding brake | 5 million idle actuations (without friction work!) | ||
| Max. brake no-load speed | 8.000 rpm | ||
| Brake closing time | 40 ms | ||
| Power consumption, brake | 26 W | ||
| Operating voltage DC for brake | 24 V | ||
| rotor position sensor, system accuracy of angle measurement | -65 arcsec ... 65 arcsec | ||
| rotor position sensor, position values per revolution | 524.288 | ||
| rotor position sensor, DC operating voltage | 5 V | ||
| Rotor position encoder interface | EnDat® 22 | ||
| rotor position sensor, manufacturer designation | ECI 1319 | ||
| Permissible radial shaft load | 1.730 N | ||
| Produktgewicht | 29.700 g | ||
| Measuring flange | 450 x 450 x 30 mm, steel | ||
| Thermal time constant | 55 min | ||
| Winding cross inductivity Lq (phase) | 7,85 mH | ||
| Phase-phase winding inductance | 15,7 mH | ||
| Voltage constant, phase-to-phase | 264,9 mVmin | ||
| Motor constant | 3,85 Nm/A | ||
| Nominal motor current | 10,3 A | ||
| Nominal power rating of motor | 4.157 W | ||
| Drehzahl max. | 1.812 rpm | ||
| Peak torque | 86 Nm | ||
| Standstill torque | 44 Nm | ||
| Type of winding switch | Star inside | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions | ||
| Zulassung | RCM trademark | ||
| Schwingfestigkeit | As per EN 60068-2-6 | ||
| Korrosionsbeständigkeitsklasse KBK | 0 - No corrosion stress | ||
| Verschmutzungsgrad | 2 | ||
| Elektrischer Anschluss 1, Anzahl Pole/Adern | 15 | ||
| Elektrischer Anschluss 1, Anschlussart | Hybrid plug | ||
| Featherkey shaft type | DIN 6885 A 8 x 7 x 36 | ||
| Detent torque | <1.0% of the peak torque | ||
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N | ||
| Schutzart | IP21 | ||
| Motor type to EN 60034-7 | IM B5 IM V1 IM V3 | ||
| Rating class as per EN 60034-1 | S1 | ||
| Temperature class as per EN 60034-1 | F | ||
| Relative Luftfeuchtigkeit | 0 - 90% | ||
| Note on max. installation height | As of 1,000 m: only with derating of -1.0% per 100 m | ||
| Note on ambient temperature | Up to 80°C with derating of -1.5% per degree Celsius |
Cookies sind kleine Textdateien, die die Benutzererfahrung auf Websites verbessern können.
Das Gesetz schreibt vor, dass wir unbedingt notwendige Cookies auf Ihrem Gerät speichern dürfen, um die ordnungsgemäße Funktion dieser Website zu gewährleisten. Für andere Arten von Cookies benötigen wir Ihre Zustimmung. Dies bedeutet, dass notwendige Cookies gemäß Art. 6 Abs. 1 lit. f DSGVO verarbeitet werden, während alle anderen Cookies, wie z. B. solche in den Kategorien Präferenzen und Marketing, gemäß Art. 6 Abs. 1 lit. a DSGVO verarbeitet werden.
cookies.cookies_about_type
Sie haben jederzeit die Möglichkeit, Ihre Zustimmung zu ändern oder zu widerrufen über die Cookie-Erklärung auf unserer Website.
Weitere Informationen über unsere Identität, wie Sie uns kontaktieren können und unsere Praktiken zur Verarbeitung personenbezogener Daten finden Sie in unserer Datenschutzerklärung.
