| Korrosionsbeständigkeitsklasse KBK | 0 - No corrosion stress | ||
| Hinweis zur Schutzart | In assembled state | ||
| Produktgewicht | 10,9 g | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Werkstoff Membran | FPM | ||
| Symbol | 00992884 | ||
| Note on flow rate Kv | For medium water Pressure difference 1 bar | ||
| Note on standard nominal flow rate | At pressure drop from 1 -> 0 bar (gaseous media) | ||
| Switching time on gaseous media | 4 ms | ||
| Note on switching frequency | Dependent on the ambient temperature and installation state | ||
| Einschaltdauer | 100% in conjunction with holding current reduction Observe the notes on operating the solenoid valves. | ||
| Spulenkennwerte | 12 - 26 V DC: low-current phase 0.06 W, high-current phase 2.2 W | ||
| Electrical power consumption | 3,5 W | ||
| Note on operational voltage range DC | With electrical sub-base VAVE-K1-… | ||
| Burst pressure | 333,5 psi | ||
| Mediumsdruck | 0 psi ... 29 psi | ||
| Umgebungstemperatur | 0 °C ... 50 °C | ||
| Media temperature for fluids | 0 °C ... 50 °C | ||
| Note on the medium | Observe resistance of materials that come into contact with the media Maximum particle size 5 µm | ||
| Fluid connection | Flange | ||
| Baugröße | 7 | ||
| Elektrischer Anschluss 1, Anzahl Pole/Adern | 2 | ||
| Elektrischer Anschluss 1, Anschlussart | Socket | ||
| Einbaulage | optional | ||
| Rückstellart | Mechanical spring | ||
| Betätigungsart | Electric | ||
| Nennweite | 1,2 mm | ||
| Lebensmitteltauglichkeit | See supplementary material information | ||
| Dichtprinzip | Soft |
| Anwendungshinweis | For indoor use only | ||
| Schutzart | IP40 | ||
| LABS-Konformität | VDMA24364 zone III | ||
| Werkstoff Dichtungen | FPM | ||
| Werkstoff Gehäuse | PA-reinforced PEEK PPA reinforced | ||
| Water flow rate at max. operating pressure | 0.3 l/min 0.018 m³/h | ||
| Durchfluss Kv | 0,22 l/min | ||
| Standard nominal flow rate | 7,2 l/min | ||
| Switch-on time for fluids | 5 ms | ||
| Max. Schaltfrequenz | 6 Hz | ||
| Isolierstoffklasse | B | ||
| Information on power consumption | Low-current phase 0.3 W, high-current phase 3.5 W for 60 ms, in combination with VAVE-K1-… | ||
| Zulässige Spannungsschwankungen | +/- 10 % | ||
| Betriebsspannungsbereich DC | 12 V ... 26 V | ||
| Medium pressure, reversible | 0 psi ... 14,5 psi | ||
| Lagertemperatur | -20 °C ... 70 °C | ||
| Medium temperature gaseous media | 0 °C ... 50 °C | ||
| Internal volume | 15 µl fluid chamber valve 21 µl valve with fluid connections | ||
| Medium | Liquid media Gaseous media | ||
| Rastermaß | 7,5 mm | ||
| Elektrischer Anschluss 1, Anschlussbild | 00997312 | ||
| Elektrischer Anschluss 1, Anschlusstechnik | Connection pattern Q7 | ||
| Befestigungsart | Via through-hole for M2 screw | ||
| Handhilfsbetätigung | None | ||
| Steuerart | Direct | ||
| Strömungsrichtung | Reversible with restrictions | ||
| Ventilfunktion | 2/2-way, closed, monostable | ||
| vom Medium berührte Werkstoffe | FPM PEEK | ||
| Konstruktiver Aufbau | Rocker valve with diaphragm seal |
