| Max. tooth force against tooth fracture (at a shock factor of 1,35) | Fz max | 16,100 | |
| Diameter turning inner ring lower tolerance | -0,50 | mm | |
| Diameter turning inner ring | d1 | 268 | mm |
| Pitch circle diameter gearing | d0 | 255,50 | mm |
| Number of teeth | z | 73 | |
| Max. radial load fixing screws (friction locking) | Fr zul | 22,400 | |
| Thread depth fixing hole | Gl | 20 | mm |
| Pitchcircle diameter fixing holes inner ring | Li | 290 | mm |
| Outside diameter inner ring upper tolerance | 0,04 | mm | |
| Counterbore depth of fixing holes | tS | 11 | mm |
| Fixing bore | dB | 11 | mm |
| Pitchcircle diameter fixing holes outer ring | La | 362 | mm |
| Max. tooth force root fatigue strenght (at a shock factor of 1,2) | Fz norm | 10,800 | |
| Diameter turning inner ring upper tolerance | 0,50 | mm | |
| Width gearing | b | 40 | mm |
| Profile shift | -0,75 | ||
| Modul of gearing | m | 3,50 | mm |
| Number of fixing holes in inner ring | ni | 8 | |
| Tread fixing bore | dBa | M10 | |
| Outside diameter inner ring lower tolerance | 0 | mm | |
| Outside diameter inner ring | da | 320 | mm |
| Counterbore diameter of fixing holes | dS | 18 | mm |
| Number of fixing holes in outer ring | na | 8 | |
| Inner diameter outer ring upper tolerance | 0,06 |
| Normal axial clearance max. | 0,18 | ||
| Normal radial clearance max. | 0,08 | ||
| Width inner ring | B | 53 | mm |
| Length centering outer ring | T | 6 | mm |
| Höhe | T | 59 | mm |
| Diameter centring inner ring | diZT | 333 | mm |
| Normal axial clearance min. | 0,08 | ||
| Normal radial clearance min. | 0,03 | ||
| Width Outer ring | C | 34 | mm |
| Außen-Ø | D | 382 | mm |
| Length centering inner ring | t | 4 | mm |
| Bore diameter | d | 250 | mm |
