a)
Hydraulic connection*) G1 on two sides
b)
In addition, both middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| Industriekomponente | 170 | mm | |
| B3 | 245 | mm | |
| E2 | 110 | mm | |
| Kraft | 20 | mm | |
| H | 90 | mm | |
| N1 (For mounting from below with ISO 4762) | 23 | mm | |
| S1 | 14,50 | mm |
| B1 | 227 | mm | |
| E1 | 142 | mm | |
| E3 | 82 | mm | |
| G1 | 1/4" | ||
| H1 | 76 | mm | |
| N2 (For mounting from below with DIN 7984) | 21,50 | mm | |
| S2 | M16 |
| Haltekraft (The inspection is done in a mounted state with a lubricated layer (ISO-VG 68).,At 150 bar) | 22.700 | N | |
| Maximaler hydraulischer Betriebsdruck | 150 | bar | |
| Betriebsbedingungen | Operating conditions | ||
| Zulässige Umgebungstemperatur (min ... max) | 0 °C ... +70 °C |
| Schluckvolumen (Per clamping) | 3,80 | cm³ | |
| Masse | 17,30 | kg | |
| Baugröße | 65 |
