a)
Air connection*) G1 on two sides for release pressure
b)
Connection*) G2 on two sides for air-plus port or air filter
c)
Adjusting screw on two sides
d)
Spacer plate (accessory)
e)
Exhaust on two sides
f)
Air filter: Connection G2 (possible on two sides)
g)
At least two middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| Industriekomponente | 100 | mm | |
| B3max | 123,80 | mm | |
| E2 | 62 | mm | |
| E6 | 24 | mm | |
| F1 | 8 | mm | |
| F3 | 40,80 | mm | |
| G1 | G1/8" | ||
| H | 48 | mm | |
| N3 | 10 | mm | |
| S2 | M10 | ||
| Schalter | Ø15,SW13 |
| B1 | 109 | mm | |
| E1 | 82 | mm | |
| E3 | 26 | mm | |
| E7 | 54,50 | mm | |
| F2 | 11 | mm | |
| F4 | 66,50 | mm | |
| G2 | G1/8" | ||
| H1 (for roller runner block .H. (...high...) Spacer plate necessary.) | 42 | mm | |
| N4 | 10 | mm | |
| S3 | M8 | ||
| Industrielle Stärke | 6,50 | mm |
| Federenergie-Haltekraft mit Standard-Luftanschluss (Holding force by spring energy. The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). ) | 2.800 | N | |
| Luftverbrauch (Normalliter) Standard-Luftanschluss | 0,14 | dm³/stroke | |
| Maximaler pneumatischer Betriebsdruck | 8 | bar | |
| Masse | 2,25 | kg | |
| Baugröße | 35 |
| Federenergie-Haltekraft mit Air-Plus-Anschluss (Holding force by spring energy. The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). ,Increased holding force by additional air admission at air-plus port with 6.0 bar. Circuit across 5/2- or 5/3-way directional control valve. ) | 3.800 | N | |
| Luftverbrauch (Normliter) Air-Plus-Anschluss | 0,30 | dm³/stroke | |
| Freigabedruck min. | 5,50 | bar | |
| Betriebsbedingungen | Operating conditions | ||
| Zulässige Umgebungstemperatur (min ... max) | 0 °C ... +70 °C |
