a)
Hydraulic connection*) G1 on two sides
b)
In addition, both middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| Industriekomponente | 100 | mm | |
| B3max | 141 | mm | |
| E2 | 62 | mm | |
| Kraft | 12 | mm | |
| H | 48 | mm | |
| N1 (For mounting from below with ISO 4762) | 12 | mm | |
| S1 | 8,60 | mm |
| B1 | 120,50 | mm | |
| E1 | 82 | mm | |
| E3 | 52 | mm | |
| G1 | 1/8" | ||
| H1 | 40 | mm | |
| N2 (For mounting from below with DIN 7984) | 10,20 | mm | |
| S2 | M10 |
| Haltekraft (The inspection is done in a mounted state with a lubricated layer (ISO-VG 68).,At 150 bar) | 5.700 | N | |
| Maximaler hydraulischer Betriebsdruck | 150 | bar | |
| Betriebsbedingungen | Operating conditions | ||
| Zulässige Umgebungstemperatur (min ... max) | 0 °C ... +70 °C |
| Schluckvolumen (Per clamping) | 1,10 | cm³ | |
| Masse | 2,69 | kg | |
| Baugröße | 35 |
