a)
Lubricating hole sealed with plastic cap
M6 when d ≤ 20
M8x1 when d ≥ 25
| D | 40 | mm | |
| E1 | 48 | mm | |
| H | 30 | mm | |
| H1 | 60 | mm | |
| Linie | 68 | mm | |
| N | 15 | mm | |
| S1 | M10 |
| B | 74 | ||
| E2 | 54 | mm | |
| Toleranz für H (Two or more Linear Sets on one shaft are machined to the same dimension H while installed. Dimension H is reduced by 0.5 mm. ) | + 13 - 22 |
||
| H2 | 15,50 | mm | |
| Linie (R.... ... 85: l = 900 mm, R.... ... 87: l = 1200 mm, R.... ... 88: l = 2000 mm) | 500 | mm | |
| S (Fixing screws ISO 4762-8.8) | 8,40 |
| amax | 150 | m/s² | |
| Maschinenschutz | 0,70 | kg | |
| Betriebsbedingungen | Operating conditions |
| vmax | 3 | m/s | |
| Welle | 3,80 | kg/m | |
| Zulässige Umgebungstemperatur (min ... max) | -10 °C ... +80 °C |
