| W (Minimum size in relation to Ø d.) | 10 | mm | |
| S | 4,50 | ||
| H2 (Tolerance ISO 8062-3 - DCTG 9.) | 42 | mm | |
| H | 25 | mm | |
| E1 | 45 mm ±0.15 | ||
| B (Tolerance ISO 8062-3 - DCTG 9.) | 42 | ||
| Industriekomponente | 60 | mm |
| Ventil (Tolerance ISO 8062-3 - DCTG 9.) | 8 | mm | |
| Linie | 45 | mm | |
| Toleranz für H (Clamped (fastened) in relation to Ø d.) | + 5 - 19 |
||
| E2 | 32 mm ±0.15 | ||
| B1 | 28 | mm | |
| Industriekomponente (Tolerance ISO 8062-3 - DCTG 9.) | 60 | mm | |
| D | 32 | mm |
| Zulässige Umgebungstemperatur (min ... max) (for standard Linear Bushings without wiper seals) | -10 °C ... +100 °C | ||
| Radialspiel der Welle h6 | + 36 + 4 |
||
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 6 | N | |
| vmax | 2,50 | m/s |
| Betriebsbedingungen | Operating conditions | ||
| Losbrechkraft | 16 | N | |
| Maschinenschutz | 0,39 | kg | |
| amax | 100 | m/s² |
