| Werkstoff Schrauben | Steel | ||
| Werkstoff Dichtungen | FPM HNBR NBR | ||
| Pneumatischer Anschluss 2 | Prepared for QSP10 | ||
| Pneumatischer Anschluss 1 | Prepared for QSP10 | ||
| Elektrischer Anschluss | Plug KMH | ||
| Produktgewicht | 26,3 g | ||
| Mediumstemperatur | -5 °C ... 50 °C | ||
| Korrosionsbeständigkeitsklasse KBK | 2 - Moderate corrosion stress | ||
| Schwingfestigkeit | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Betriebsmedium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Spulenkennwerte | 24 V DC: low-current phase 0.7 W, high-current phase 3.0 W | ||
| Schaltzeit ein | 6 ms | ||
| Max. Schaltfrequenz | 10 Hz | ||
| Suitability for vacuum | yes | ||
| Signal status display | LED | ||
| Strömungsrichtung | Non-reversible | ||
| Handhilfsbetätigung | Non-detenting | ||
| Dichtprinzip | Soft | ||
| Rastermaß | 20 mm | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| Schutzart | IP40 | ||
| Betriebsdruck | 0 bar ... 1,5 bar | ||
| Pneumatischer Arbeitsanschluss | Prepared for QSP10 | ||
| Baubreite | 20 mm | ||
| Ventilfunktion | 2x2/2-way, monostable, closed |
| Werkstoff Gehäuse | PA-reinforced PPS reinforced | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Pneumatic connection, port 11 | Prepared for QSP10 | ||
| Befestigungsart | With through-hole | ||
| Max. Leitungslänge | 30 m | ||
| Umgebungstemperatur | -5 °C ... 50 °C | ||
| Lagertemperatur | -20 °C ... 60 °C | ||
| Schockfestigkeit | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| Hinweis zum Betriebs-/Steuermedium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Zulässige Spannungsschwankungen | +/- 10 % | ||
| Einschaltdauer | 100% | ||
| Schaltzeit aus | 6 ms | ||
| Standard flow rate | 30 l/min | ||
| Operating pressure, reversible | -0,95 bar ... 0 bar | ||
| Symbol | 00992254 | ||
| Steuerart | Direct | ||
| Einbaulage | optional | ||
| Abluftfunktion | Without flow control option | ||
| Nennweite | 1,5 mm | ||
| CE-Zeichen (siehe Konformitätserklärung) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Rückstellart | Mechanical spring | ||
| Operating voltage | 24V DC | ||
| Standard nominal flow rate | 30 l/min | ||
| Betätigungsart | Electric |