| Bore diameter bearing | d | 6 | mm |
| Width inner ring | B | 6 | mm |
| Basic static load rating, radial | C0r | 10,300 |
| Outside diameter bearing | D | 14 | mm |
| Basic dynamic load rating, radial | Cr | 3,600 |
| Edge Spacing | r1smin | 0,30 | mm |
| Ball diameter | dK | 10 | mm |
| Outer eye diameter | d2 | 21 | mm |
| Shank diameter | d4 | 10 | mm |
| Width of the rod end | C1 | 4,40 | mm |
| Thread length Internal thread | l3 | 11 | mm |
| length rod end shank | l5 | 5 | mm |
| Shank diameter, large | d5 | 13 | mm |
| Radialluft | Gr | 0 - 0,032 | |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Outer flange diameter inner ring | d1 | 8 | mm |
| Thread size | d3 | M6 | |
| Shank Length Internal thread head | h1 | 30 | mm |
| Tilt angle | α | 13 | ° |
| Total length internal thread head | l4 | 40,50 | mm |
| Distance drilling with/shaft start | l7 | 12 | mm |
| Width Across Flat | W | 11 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
