REXROTH G10
9 Produkte
Entdecken Sie alle verfügbaren Konfigurationen für die Produktserie REXROTH G10 – Subplate. Finden Sie das passende Produkt durch Filtern mit Anzahl der Hauptanschlüsse, Aktuatoranschlüsse P, A, B, T, Steuerungssystemanschlüsse und Übertragungsmuster.
G10 Typcodes
| Serie | Katalognummernformat | Beschreibung |
|---|---|---|
| G10 | G- - - -1X- - | Subplate |
Typcode zur Katalognummer G10,
G- - - -1X- -
| 001 | Series |
|---|---|
| G | Subplate |
| 002 | Size |
| 04 | NG4 |
| 05 | NG5 |
| 06 | NG6 |
| 10 | NG10 |
| 16 | NG16 |
| 20 | NG20 |
| 25 | NG25 |
| 30 | NG30 |
| 32 | NG32 |
| 003 | Porting pattern |
| A | Directional valves with one tank port, flow control valves |
| C | Isolator, directional, pressure and flow control valves |
| D | Isolator, directional, pressure and flow control valves |
| E | Pressure relief valves |
| G | Flow control valves |
| R | Rexroth-specific hole pattern |
| U | ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03, with 4 mm locating pin bore |
| V | Valves up to 630 bar |
| 004 | Number of main ports |
| 2 | 2 main ports A, B / X, Y / P, T / P, A |
| 3 | 3 main ports P, A, T |
| 4 | 4 main ports P, A, B, T |
| 005 | Component series |
| 1X | 10 … 19 (10 … 19: unchanged installation and connection dimensions) |
| 006 | Actuator ports P, A, B, T |
| G1/4 | G1/4 |
| G3/8 | G3/8 |
| G3/4 | G3/4 |
| G1/2 | G1/2 |
| G1 | G1 |
| G1 1/4 | G1 1/4 |
| G1 1/2 | G1 1/2 |
| M14 | M14 |
| M18 | M18 |
| M22 | M22 |
| M27 | M27 |
| M33 | M33 |
| M48 | M48 |
| NPT 1/2 | NPT 1/2 |
| NPT 1 | NPT 1 |
| UNF7/8-12 | 7/8-12UNF |
| UNF3/4-16 | 3/4-16UNF |
| UNF9/16-18 | 9/16-18UNF |
| UNF7/8-20 | 7/8-20UNF |
| UNF7/16-20 | 7/16-20UNF |
| UN1 1/16-12 | 1 1/16-12UN |
| UN1 5/16-12 | 1 5/16-12UN |
| UN1 5/8-12 | 1 5/8-12 UN |
| UN1 7/8-12 | 1 7/8-12 UN |
| FL19 | Flange ISO 6164 DN19 |
| FL32 | Flange ISO 6164 DN32 |
| FL51 | Flange ISO 6164 DN51 |
| 007 | Control system ports |
|---|---|
| G1/4 | G1/4 |
| G3/8 | G3/8 |
| G1/2 | G1/2 |
| M14 | M14 |
| M18 | M18 |
| UNF 20 | 7/16-20UNF |
| UNF 18 | 9/16-18UNF |
| UNF20 | 7/16-20UNF |
| UNF18 | 9/16-18UNF |
| 008 | Porting pattern |
| Rear ports | |
| S | Lateral ports |
| 009 | Design (outer dimensions) |
| Standard size | |
| M | Small design 'mini' |
| L | Large design 'large' |
| 010 | Corrosion resistance |
| Standard | |
| J3 | Improved corrosion protection (240 h in salt spray test according to DIN EN ISO 9227) |
| J5 | Maximum corrosion protection (720 h in salt spray test according to DIN EN ISO 9227) |
| 011 | Special versions |
| SO003 | With additional port L |
| SO331 | Special hole pattern with leakage oil connection on top for 5-4WE 10 -5X/… |
| SO699 | High-pressure valves 500 bar |
| SO771 | Special hole pattern without port X but with leakage oil connection such as standard hole pattern for 5-4 WE 10 ..-5X/… |
| SO001 | Name plate on the opposite side |
| None |