| Power consumption, brake | 7,2 W | ||
| Brake holding torque | 1,3 Nm | ||
| Rotor position transducer resolution | 20 bit | ||
| rotor position sensor, DC operating voltage range | 4,75 V ... 5,25 V | ||
| Rotor position sensor, encoder measuring principle | Optical | ||
| rotor position sensor, absolute detectable revolutions | 1 | ||
| Rotor position sensor | Absolute single-turn encoder | ||
| Permissible axial shaft load | 90 N | ||
| Total mass moment of inertia of output | 0,425 kgcm² | ||
| Electric time constant | 1,98 ms | ||
| Phase-phase winding resistance | 5,8 Ohm | ||
| Motor constant | 0,562 Nm/A | ||
| Nominal motor current | 2,4 A | ||
| Nominal power rating of motor | 400 W | ||
| Drehzahl max. | 6.000 rpm | ||
| Peak torque | 3,81 Nm | ||
| Standstill torque | 1,4 Nm | ||
| Type of winding switch | Star inside | ||
| Nennbetriebsspannung DC | 300 V | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions | ||
| Zulassung | c UL us - Recognized (OL) | ||
| Schwingfestigkeit | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Korrosionsbeständigkeitsklasse KBK | 0 - No corrosion stress | ||
| Verschmutzungsgrad | 2 | ||
| Elektrischer Anschluss 1, Anzahl Pole/Adern | 6 | ||
| Elektrischer Anschluss 1, Anschlussart | Plugs | ||
| Balance quality | G 2.5 | ||
| Hinweis zur Schutzart | IP40 for motor shaft without rotary shaft seal IP54 for motor shaft with rotary shaft seal IP65 for motor housing without connection technology | ||
| Einbaulage | optional | ||
| Temperature monitoring | Digital motor temperature transmission via Nikon A format | ||
| Max. winding temperature | 155 °C | ||
| Entspricht Norm | IEC 60034 | ||
| Lagertemperatur | -20 °C ... 55 °C | ||
| Max. installation height | 4.000 m | ||
| Umgebungstemperatur | -15 °C ... 40 °C |
| Operating voltage DC for brake | 24 V | ||
| rotor position sensor, system accuracy of angle measurement | -120 arcsec ... 120 arcsec | ||
| rotor position sensor, position values per revolution | 1.048.576 | ||
| rotor position sensor, DC operating voltage | 5 V | ||
| Rotor position encoder interface | Nikon A-format | ||
| rotor position sensor, manufacturer designation | SAR-ML50AJC00 | ||
| Permissible radial shaft load | 180 N | ||
| Produktgewicht | 1.900 g | ||
| Measuring flange | 255 x 255 x 8 mm, aluminium | ||
| Phase-phase winding inductance | 11,5 mH | ||
| Voltage constant, phase-to-phase | 34 mVmin | ||
| Peak current | 7,2 A | ||
| Continuous stall current | 2,6 A | ||
| Max. mechanical speed | 10.000 rpm | ||
| Nominal rotary speed | 3.000 rpm | ||
| Nenn-Anziehdrehmoment | 1,27 Nm | ||
| Number of pole pairs | 3 | ||
| Nominal voltage DC | 300 V | ||
| Zertifikat ausstellende Stelle | UL E342973 | ||
| CE-Zeichen (siehe Konformitätserklärung) | To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
| Schockfestigkeit | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| LABS-Konformität | VDMA24364 zone III | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Elektrischer Anschluss 1, Anschlussbild | 00995792 | ||
| Elektrischer Anschluss 1, Anschlusstechnik | Connection pattern RE | ||
| Storage lifetime under nominal conditions | 20.000 h | ||
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N | ||
| Schutzart | IP65 | ||
| Motor type to EN 60034-7 | IM B5 IM V1 IM V3 | ||
| Rating class as per EN 60034-1 | S1 | ||
| Temperature class as per EN 60034-1 | F | ||
| Relative Luftfeuchtigkeit | 0 - 90% | ||
| Note on max. installation height | As of 1,000 m: only with derating of -1.0% per 100 m | ||
| Note on ambient temperature | Up to 60°C with derating of -1.5% per degree Celsius |
