| Material toothed belt | Polychloroprene with glass fibre | ||
| Material pulleys | High-alloy stainless steel | ||
| Material guide slide | Tempered steel | ||
| Material cover tape | Stainless steel strip | ||
| Material profile | Anodised wrought aluminium alloy | ||
| Logic interface, plug pattern | 00992264 | ||
| Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 | ||
| IO-Link, connection technology | Plugs | ||
| Switching logic for outputs | PNP (positive switching) | ||
| IO-Link, Datenspeicher benötigt | 500 Byte | ||
| IO-Link, Servicedateninhalt IN | 32-bit force 32-bit position 32-bit speed | ||
| IO-Link, Prozessdatenbreite IN | 2 bytes | ||
| IO-Link, Prozessdatenbreite OUT | 2 bytes | ||
| IO-Link, Port class | A | ||
| IO-Link, Protokollversion | Device V 1.1 | ||
| IO-Link, SIO-Mode Unterstützung | Yes | ||
| Specification logic input | Based on IEC 61131-2, type 1 | ||
| Number of digital logic outputs 24 V DC | 2 | ||
| Weight of slide | 55 g | ||
| Bewegte Masse | 169 g | ||
| Torsional mass moment of inertia It | 8.500 mm⁴ | ||
| Max. feed force Fx | 75 N | ||
| Max. Moment My | 4,7 Nm | ||
| Max. Kraft Fz | 600 N | ||
| Features of digital logic outputs | Configurable Not galvanically isolated | ||
| Max. Geschwindigkeit | 1,2 m/s | ||
| Betriebsbereitschaftsanzeige | LED | ||
| Zusatzfunktionen | User interface Integrated end-position sensing | ||
| Rotor position sensor, encoder measuring principle | Magnetic | ||
| Referencing | Positive fixed stop block Negative fixed stop block | ||
| Symbol | 00997293 | ||
| Konstruktiver Aufbau | Electromechanical linear axis With toothed belt With integrated drive | ||
| Einbaulage | Horizontal | ||
| Toothed-belt stretch | 0,187 % | ||
| Baugröße | 45 | ||
| Effective diameter of drive pinion | 19,1 mm | ||
| 2nd moment of area Iy | 140.000 mm⁴ | ||
| Umgebungstemperatur | 0 °C ... 50 °C | ||
| Schutzart | IP40 | ||
| Lagertemperatur | -20 °C ... 60 °C | ||
| Schockfestigkeit | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| KC-Zeichen | KC-EMV | ||
| Power supply, connection pattern | 00995989 | ||
| power supply, connection system | M12x1, T-coded according to EN 61076-2-111 | ||
| Zulässige Spannungsschwankungen | +/- 15% | ||
| Parameterisation interface | IO-Link User interface | ||
| Nominal voltage DC | 24 V | ||
| Max. current digital logic outputs | 100 mA | ||
| Einschaltdauer | 100% |
| Material slide | Die-cast aluminium | ||
| Material guide rail | Tempered steel | ||
| Material drive cover | Painted die cast aluminium | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Material end cap | Painted die cast aluminium | ||
| Logic interface, number of pins/wires | 8 | ||
| Logic interface, connection type | Plug | ||
| Switching logic for inputs | PNP (positive switching) | ||
| Max. Leitungslänge | 15 m outputs 15 m inputs 20 m with IO-Link® operation | ||
| IO-Link, minimale Zykluszeit | 1 ms | ||
| IO-Link, Prozessdateninhalt IN | 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out) | ||
| IO-Link, Prozessdateninhalt OUT | 1-bit (move in) 1-bit (move out) 1-bit (quit error) | ||
| IO-Link, Number of ports | 1 | ||
| IO-Link, Communication mode | COM3 (230.4 kBaud) | ||
| Features of logic input | Configurable Not galvanically isolated | ||
| Working range of logic input | 24 V | ||
| Number of digital logic inputs | 2 | ||
| Produktgewicht | 3.630 g | ||
| Bewegte Masse bei 0 mm Hub | 169 g | ||
| Feed constant | 60 mm/U | ||
| Reference value effective load, horizontal | 2,5 kg | ||
| Max. Moment Mz | 4,7 Nm | ||
| Max. Moment Mx | 5,5 Nm | ||
| Max. Kraft Fy | 300 N | ||
| Wiederholgenauigkeit | ±0.1 mm | ||
| Max. acceleration | 6 m/s² | ||
| Anzeige | LED | ||
| Temperature monitoring | Switch-off for excessive temperature Integrated precise CMOS temperature sensor with analogue output | ||
| Rotor position sensor | Absolute single-turn encoder | ||
| Positionserkennung | Motor encoder Via proximity switch | ||
| Type of motor | Stepper motor | ||
| Führung | Recirculating ball bearing guide | ||
| Toothed-belt pitch | 2 mm | ||
| Stroke reserve | 0 mm | ||
| Working stroke | 800 mm | ||
| 2nd moment of area Iz | 170.000 mm⁴ | ||
| Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C. | ||
| Schutzklasse | III | ||
| Relative Luftfeuchtigkeit | 0 - 90% | ||
| LABS-Konformität | VDMA24364 zone III | ||
| Schwingfestigkeit | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
| CE-Zeichen (siehe Konformitätserklärung) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Zulassung | RCM trademark | ||
| Power supply, number of pins/wires | 4 | ||
| Power supply, connection type | Plugs | ||
| Rotor position transducer resolution | 16 bit | ||
| Nominal current | 5,3 A | ||
| Max. Stromaufnahme | 5.300 mA | ||
| Insulation protection class | B |
Cookies sind kleine Textdateien, die die Benutzererfahrung auf Websites verbessern können.
Das Gesetz schreibt vor, dass wir unbedingt notwendige Cookies auf Ihrem Gerät speichern dürfen, um die ordnungsgemäße Funktion dieser Website zu gewährleisten. Für andere Arten von Cookies benötigen wir Ihre Zustimmung. Dies bedeutet, dass notwendige Cookies gemäß Art. 6 Abs. 1 lit. f DSGVO verarbeitet werden, während alle anderen Cookies, wie z. B. solche in den Kategorien Präferenzen und Marketing, gemäß Art. 6 Abs. 1 lit. a DSGVO verarbeitet werden.
cookies.cookies_about_type
Sie haben jederzeit die Möglichkeit, Ihre Zustimmung zu ändern oder zu widerrufen über die Cookie-Erklärung auf unserer Website.
Weitere Informationen über unsere Identität, wie Sie uns kontaktieren können und unsere Praktiken zur Verarbeitung personenbezogener Daten finden Sie in unserer Datenschutzerklärung.
