FESTO 561691 halbrotierender Antrieb

Name: 561691 FESTO
Brand: FESTO
SKU: 679995-de-eur
Price: 1769.29 EUR
Availability: InStock

DSMI-40-270-A-B

1.769,29 €

2 Stk. mit 1 bis 3 Tagen Lieferzeit nach United States

Technische Daten

Baureihe (DSMI)	Semi-rotary drive with displacement encoder, double-acting
Size [mm] (40)	40
Nominal swivel angle [°] (270)	270

Position sensing (A)	For proximity sensor
Variant (B)	B-series

Werkstoff Zylinderrohr		Wrought aluminium alloy
Material swivel vane		Reinforced PET
Material measuring system coupling		TPE-U(PU)
Material fixed stop		Steel
Material stop lever		Wrought aluminium alloy Anodised
Pneumatischer Anschluss		G1/8
Kabellänge		30 m
Repetition accuracy Soft Stop intermediate position		+/-2 deg
Repetition accuracy positioning		+/-0.3 deg
Ausgangsignal		Analogue
Produktgewicht		3.950 g
Min. mass moment of inertia, vertical		0,006 kgm²
Max. radial force		350 N
Max. mass moment of inertia horizontal		0,12 kgm²
Aufprallenergie in den Endlagen		0,1 J
Vibration resistance to DIN/IEC 68 Part 2-6		Tested to severity level 2
LABS-Konformität		VDMA24364-B2-L
Continuous shock resistance to DIN/IEC 68 Part 2-82		Tested to severity level 2
Betriebsmedium		Compressed air to ISO 8573-1:2010 [6:4:4]
CE-Zeichen (siehe Konformitätserklärung)		To EU EMC Directive In accordance with EU RoHS Directive
Connection resistance tolerance		20 %
Max. Stromaufnahme		4 mA
Max. operating voltage DC		42 V
Recommended wiper current		< 1 µA
Typical positioning time long stroke, horizontal		0.30/0.55 s
Min. travel speed		50 deg/s
Max. Schwenkfrequenz bei 0,6 MPa (6 bar, 87 psi)		2 Hz
Betriebsdruck		0,2 MPa ... 1 MPa
Konstruktiver Aufbau		Drive shaft, running in ball bearings Vane
Soft Stop installation position		Horizontal
Dämpfung		Elastic cushioning rings/plates at both ends
Kolben-Ø		40 mm
Hubreduzierung in den Endlagen		5 °

Werkstoff Steckergehäuse		PA-reinforced
Material woodruff key		Steel
Werkstoff Gehäuse		Wrought aluminium alloy Anodised
Werkstoff Antriebswelle		Nickel-plated steel
Material housing, displacement encoder		Wrought aluminium alloy Anodised
Befestigungsart		Via female thread
Electrical connection encoder		4-pin
Repetition accuracy Soft Stop end position		< 0.2 deg
Non-dependent linearity		0
Angle resolution		≤ 0,1 deg
Theoretisches Drehmoment bei 0,6 MPa (6 bar, 87 psi)		20 Nm
Min. mass moment of inertia, horizontal		0,006 kgm²
Max. mass moment of inertia vertical		0,12 kgm²
Max. axial force		120 N
Umgebungstemperatur		-10 °C ... 60 °C
Schutzart		IP65 To IEC 60529
Korrosionsbeständigkeitsklasse KBK		0 - No corrosion stress
Hinweis zum Betriebs-/Steuermedium		Lubricated operation not possible
CE marking (see declaration of conformity)		To UK instructions for EMC To UK RoHS instructions
Zulässige Spannungsschwankungen		< 1%
Nennbetriebsspannung DC		10 V
Max. wiper current, short-time		10.000 µA
Funktionsweise		Double-acting
Connection resistance		5 kOhm
Typical positioning time short stroke, horizontal		0.25/0.25 s
Max. travel speed		2.000 deg/s
Operating pressure positioning/Soft Stop		4 bar ... 8 bar
Positionserkennung		Via proximity switch Via integrated angular displacement encoder
Functional principle of measuring system		Analogue
Positioning installation position		optional
Schwenkwinkel		0 deg ... 272 deg
kleinster Positionierhub		5° during positioning 15° with Soft Stop
Einstellbereich Schwenkwinkel		0 deg ... 270 deg