FESTO 594926 halbrotierender Antrieb

Name: 594926 FESTO
Brand: FESTO
SKU: 675896-de-eur
Price: 164.84 EUR
Availability: InStock

DFPD-20-RP-90-RS20-F04

164,84 €

2 Stk. mit 1 bis 3 Tagen Lieferzeit nach United States

Technische Daten

Flange pattern 2	None
Width across fl ats	Standard
Pneumatischer Anschluss	Standard
Temperature range	Standard
Shaft material	Standard
Housing surface treatment	None
Industry focus	General
Mechanical interface	Standard
Approval for installation on ships	None

Werkstoff Welle		Nickel-plated steel High-alloy stainless steel
Material cam		Stainless steel casting Steel High-alloy stainless steel
Werkstoff Kolben		Die-cast aluminium
Werkstoff Feder		Spring steel
Werkstoff Deckel		Die-cast aluminium, coated
Werkstoff-Hinweis		Contains paint-wetting impairment substances RoHS-compliant
Shaft connection		T9 T11
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°		0,8 l ... 1,8 l
Spring return torque at 0° swivel angle		2,4 Nm ... 7,2 Nm
Torque at nominal operating pressure and 90° swivel angle		2,5 Nm ... 20,1 Nm
Umgebungstemperatur		-50 °C ... 150 °C
Hinweis zum Betriebs-/Steuermedium		Lubricated operation possible (in which case lubricated operation will always be required)
Ex-Umgebungstemperatur		-20°C <= Ta <= +80°C -50°C <= Ta <= +60°C 0°C <= Ta <= +150°C
Ex-Zündschutzart Gas		Ex h IIC T3 Gb X Ex h IIC T4 Gb X Ex h IIC T6 Gb X
ATEX-Kategorie Gas		II 2G
Explosionsschutz		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE-Zeichen (siehe Konformitätserklärung)		To EU Explosion Protection Directive (ATEX)
Nennbetriebsdruck		2 bar ... 6 bar
Safety Integrity Level (SIL)		Up to SIL 2 High Demand mode
Valve connection conforms to standard		VDI/VDE 3845 (NAMUR)
Closing direction		Closes to the right Closes to the left
Funktionsweise		Double-acting Single-acting
Fitting connection conforms to standard		ISO 5211
End-position adjustment range at nominal swivel angle		-5 deg ... 5 deg
Schwenkwinkel		90 deg ... 180 deg
Size of valve actuator		20

Werkstoff Schrauben		High-alloy stainless steel
Werkstoff Lager		POM PPS reinforced
Werkstoff Gehäuse		Anodised wrought aluminium alloy
Werkstoff Dichtungen		FPM FVMQ NBR
Werkstoff Anschlussplatte		Anodised wrought aluminium alloy
Pneumatischer Anschluss		G1/8 1/8 NPT
Produktgewicht		1.355 g ... 1.423 g
Spring return torque at 90° swivel angle		4,8 Nm ... 14,3 Nm
Note on torque		The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Torque at nominal operating pressure and 0° swivel angle		4,9 Nm ... 20,1 Nm
Lagertemperatur		-20 °C ... 60 °C
Betriebsmedium		Compressed air to ISO 8573-1:2010 [7:4:4]
Ex-Zündschutzart Staub		Ex h IIIC T105°C Db X Ex h IIIC T175°C Db X Ex h IIIC T85°C Db X
ATEX-Kategorie Staub		II 2D
Zertifikat ausstellende Stelle		DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
CE marking (see declaration of conformity)		To UK EX instructions
Maritime Klassifizierung		See certificate
Betriebsdruck		2 bar ... 8 bar
Connection point for positioner and position sensor conforms to standard		VDI/VDE 3845 size AA 1
Symbol		00991265 00991266
Konstruktiver Aufbau		Rack and pinion
Einbaulage		optional
Shaft connection depth		10 mm ... 12 mm
End-position adjustment range at 0°		-5 deg ... 5 deg
Flanschbohrbild		F03 F04 F05