FESTO 8084143 halbrotierender Antrieb

DFPD-1200-RP-90-RS60-F1012

1.809,81 €
1 Stk. mit 1 bis 3 Tagen Lieferzeit nach United States

Technische Daten

Baureihe (DFPD) Semi-rotary drive
System of units Metric
Baugröße (1200) 1.200
Konstruktiver Aufbau (RP) Rack and pinion
Swivel angle [°] (90) 90
Swivel direction (R) Right
Funktion (S) Single-acting
Spring force (60) For connection pressure 6 bar
Normale Position Closed
Flange pattern 1 (F10) Hole pattern F10
Flange pattern 2 None
Width across fl ats Standard
Pneumatischer Anschluss Standard
Temperature range Standard
Shaft material Standard
Housing surface treatment None
Industry focus General
Mechanical interface Standard
Approval for installation on ships None
Size of valve actuator 1.200
Schwenkwinkel 90 deg
End-position adjustment range at nominal swivel angle -5 deg ... 5 deg
Fitting connection conforms to standard ISO 5211
Funktionsweise Single-acting
Closing direction Closes to the right
Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
Device type according to VDMA 66413 Safety device
Safety Integrity Level (SIL) To SIL 2 Low Demand mode Up to SIL 3 in a redundant architecture Up to SIL 1 high demand mode
Betriebsdruck 29 psi ... 116 psi
Maritime Klassifizierung See certificate
CE marking (see declaration of conformity) To UK EX instructions
Zertifikat ausstellende Stelle DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
ATEX-Kategorie Staub II 2D
Ex-Zündschutzart Staub Ex h IIIC T105°C Db X
Betriebsmedium Compressed air to ISO 8573-1:2010 [7:4:4]
Korrosionsbeständigkeitsklasse KBK 2 - Moderate corrosion stress
Umgebungstemperatur -20 °C ... 80 °C
Torque at nominal operating pressure and 90° swivel angle 477,2 Nm
Spring return torque at 0° swivel angle 479,4 Nm
Mittlere Zeit bis zum gefährlichen Ausfall (MTTFd) 1126 years
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° 43,5 l
Shaft connection T27
Werkstoff-Hinweis RoHS-compliant
Werkstoff Deckel Die-cast aluminium, coated
Werkstoff Feder Spring steel
Werkstoff Kolben Die-cast aluminium
Material cam Steel
Werkstoff Welle Nickel-plated steel
Flanschbohrbild F1012
End-position adjustment range at 0° -5 deg ... 5 deg
Shaft connection depth 29 mm
Einbaulage optional
Konstruktiver Aufbau Rack and pinion
Symbol 00991266
Connection point for positioner and position sensor conforms to standard VDI/VDE 3845 size AA 3
Sicherheitsfunktion The fundamental safety function consists of the control valve moving to the switching position when the compressed air is turned off. It is reset by spring force.
Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in SRP/CS up to SIL 2 (Low Demand) Product can be used in SRP/CS up to SIL 1 (High Demand) Up to SIL 3 in a redundant architecture
Nennbetriebsdruck 87 psi
CE-Zeichen (siehe Konformitätserklärung) To EU Explosion Protection Directive (ATEX)
Explosionsschutz Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
ATEX-Kategorie Gas II 2G
Ex-Zündschutzart Gas Ex h IIC T4 Gb X
Ex-Umgebungstemperatur -20°C <= Ta <= +80°C
Hinweis zum Betriebs-/Steuermedium Lubricated operation possible (in which case lubricated operation will always be required)
Lagertemperatur -20 °C ... 60 °C
Torque at nominal operating pressure and 0° swivel angle 796,3 Nm
Note on torque The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Spring return torque at 90° swivel angle 798,6 Nm
PFD 0,001
Produktgewicht 43.022 g
Pneumatischer Anschluss G1/4
Werkstoff Anschlussplatte Anodised wrought aluminium alloy
Werkstoff Dichtungen NBR
Werkstoff Gehäuse Anodised wrought aluminium alloy
Werkstoff Lager POM
Werkstoff Schrauben High-alloy stainless steel
1.809,81 €
Lagerbestand 1 Stk.
Teilenummer 8084143
Hersteller FESTO
Menge Stückpreis
1+ 1.809,81 €

  • Registrierung öffnen
    Erstellen Sie Ihr Konto sofort
  • Support 24/7
    Fragen Sie uns jederzeit
  • 100 % Sicherheit
    Nur sichere Zahlungen: Überweisung, Kreditkarte und PayPal
  • Mengenrabatte
    Optimieren Sie Ihre Beschaffung