| Werkstoff Welle | Nickel-plated steel High-alloy stainless steel | ||
| Material cam | Stainless steel casting Steel High-alloy stainless steel | ||
| Werkstoff Kolben | Die-cast aluminium | ||
| Werkstoff Feder | Spring steel | ||
| Werkstoff Deckel | Die-cast aluminium, coated | ||
| Werkstoff-Hinweis | Contains paint-wetting impairment substances RoHS-compliant | ||
| Shaft connection | T17 T22 | ||
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 5,9 l ... 14 l | ||
| Spring return torque at 0° swivel angle | 19,2 Nm ... 57,7 Nm | ||
| Torque at nominal operating pressure and 90° swivel angle | 20,5 Nm ... 161 Nm | ||
| Umgebungstemperatur | -50 °C ... 150 °C | ||
| Hinweis zum Betriebs-/Steuermedium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Ex-Umgebungstemperatur | -20°C <= Ta <= +80°C -50°C <= Ta <= +60°C 0°C <= Ta <= +150°C | ||
| Ex-Zündschutzart Gas | Ex h IIC T3 Gb X Ex h IIC T4 Gb X Ex h IIC T6 Gb X | ||
| ATEX-Kategorie Gas | II 2G | ||
| Explosionsschutz | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| CE-Zeichen (siehe Konformitätserklärung) | To EU Explosion Protection Directive (ATEX) | ||
| Nennbetriebsdruck | 2 bar ... 6 bar | ||
| Safety Integrity Level (SIL) | Up to SIL 2 High Demand mode | ||
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) | ||
| Closing direction | Closes to the right Closes to the left | ||
| Funktionsweise | Double-acting Single-acting | ||
| Fitting connection conforms to standard | ISO 5211 | ||
| End-position adjustment range at nominal swivel angle | -5 deg ... 5 deg | ||
| Schwenkwinkel | 90 deg ... 180 deg | ||
| Size of valve actuator | 160 |
| Werkstoff Schrauben | High-alloy stainless steel | ||
| Werkstoff Lager | POM PPS reinforced | ||
| Werkstoff Gehäuse | Anodised wrought aluminium alloy | ||
| Werkstoff Dichtungen | FPM FVMQ NBR | ||
| Werkstoff Anschlussplatte | Anodised wrought aluminium alloy | ||
| Pneumatischer Anschluss | G1/4 1/4 NPT | ||
| Produktgewicht | 6.082 g ... 7.206 g | ||
| Spring return torque at 90° swivel angle | 38,1 Nm ... 114,2 Nm | ||
| Note on torque | The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. | ||
| Torque at nominal operating pressure and 0° swivel angle | 39,3 Nm ... 161 Nm | ||
| Lagertemperatur | -20 °C ... 60 °C | ||
| Betriebsmedium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Ex-Zündschutzart Staub | Ex h IIIC T105°C Db X Ex h IIIC T175°C Db X Ex h IIIC T85°C Db X | ||
| ATEX-Kategorie Staub | II 2D | ||
| Zertifikat ausstellende Stelle | DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19 | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Maritime Klassifizierung | See certificate | ||
| Betriebsdruck | 2 bar ... 8 bar | ||
| Connection point for positioner and position sensor conforms to standard | VDI/VDE 3845 size AA 1 | ||
| Symbol | 00991265 00991266 | ||
| Konstruktiver Aufbau | Rack and pinion | ||
| Einbaulage | optional | ||
| Shaft connection depth | 19 mm ... 24 mm | ||
| End-position adjustment range at 0° | -5 deg ... 5 deg | ||
| Flanschbohrbild | F07 F0710 |
