| Db min - Min stop ring position diameter | 45,5 mm | ||
| ra max - Max shaft & housing fillet radius | 0,3 mm | ||
| da min - Min shoulder diameter IR | 32 mm | ||
| FTF - Characteristic cage frequency | 0,451 Hz | ||
| BPFO - Characteristic outer ring frequency | 8,125 Hz | ||
| Tmin - Min operating temperature | -25 °C | ||
| f0 - Coefficient | 16,50 | ||
| C0 - Static load | 3,65 kN | ||
| Radial clearance class | CN | ||
| f - Stop ring thickness | 0,85 mm | ||
| r0 max - Max bottom groove radius | 0,25 mm | ||
| b min - Min groove width | 0,95 mm | ||
| rNs - Min fillet radius | 0,3 mm | ||
| Ca max - Max segment position | 2,15 mm | ||
| a max - Max position groove | 1,3 mm | ||
| Brand | NTN |
| rNa max - Max fillet radius on segment side | 0,3 mm | ||
| Da max - Max shoulder diameter OR | 40 mm | ||
| BSF - Characteristic rolling element frequency | 10,189 Hz | ||
| BPFI - Characteristic inner ring frequency | 9,875 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Grease lubrication limit speed | 15000 tr/min | ||
| Cu - Fatigue limit load | 0,244 kN | ||
| C - Dynamic load | 5,2 kN | ||
| Snap ring reference | R42 | ||
| D4 max - Max outer diameter of assembled stop ring | 44,8 mm | ||
| b max - Max groove width | 1,2 mm | ||
| D3 - Max bottom groove diameter | 40,7 mm | ||
| rs - Min fillet radius | 0,3 mm | ||
| Ca min - Mini segment position | 2 mm | ||
| a min - Min position Groove | 1,15 mm |
