| Brand | SNR | ||
| a - Charge load application point | 41,5 mm | ||
| a min - Min position Groove | 3,07 mm | ||
| rs - Min fillet radius | 1,5 mm | ||
| D3 - Max bottom groove diameter | 76,81 mm | ||
| b max - Max groove width | 2,2 mm | ||
| D4 max - Max outer diameter of assembled stop ring | 86,6 mm | ||
| Snap ring reference | R 80 | ||
| C - Dynamic load | 50,2 kN | ||
| Cu - Fatigue limit load | 2,21 kN | ||
| Nref - Reference thermal speed | 6800 tr/min | ||
| Tmin - Min operating temperature | -20 °C | ||
| BPFO - Characteristic outer ring frequency | 2,712 Hz | ||
| FTF - Characteristic cage frequency | 0,387 Hz | ||
| da min - Min shoulder diameter IR | 43 mm | ||
| Da max - Max shoulder diameter OR | 72 mm | ||
| Ca max - Max segment position | 4,98 mm | ||
| rNa max - Max fillet radius on segment side | 0,6 mm |
| D1 - Inner diameter outer ring | 68,4 mm | ||
| α - Contact angle | 25 ° | ||
| a max - Max position groove | 3,28 mm | ||
| rNs - Min fillet radius | 0,6 mm | ||
| b min - Min groove width | 1,9 mm | ||
| r0 max - Max bottom groove radius | 0,6 mm | ||
| f - Stop ring thickness | 1,65 mm | ||
| Radial clearance class | CN | ||
| C0 - Static load | 34,6 kN | ||
| f0 - Coefficient | 13,40 | ||
| Nlim - Mechanical Limit Speed | 6600 tr/min | ||
| Tmax - Max operating temperature | 120 °C | ||
| BPFI - Characteristic inner ring frequency | 4,288 Hz | ||
| BSF - Characteristic rolling element frequency | 3,82 Hz | ||
| da max - Max shoulder diameter IR | 49,3 mm | ||
| Ca min - Mini segment position | 4,67 mm | ||
| ra max - Max shaft & housing fillet radius | 1,5 mm | ||
| Db min - Min stop ring position diameter | 88 mm |
