| medium-contacting part stopper material | stainless steel | ||
| rated power ac | 25 v·a | ||
| thermal insulation class of the actuator | h | ||
| coil size | 40 mm | ||
| coil type | block bolted | ||
| cable plug art. no. - type | 00314802 - 2518 | ||
| cable plug in delivery | enclosed | ||
| installation length | 74,5 mm | ||
| nominal operation/duty cycle | 100 % | ||
| switch time close min | 700 ms | ||
| switch time open min | 100 ms | ||
| valve construction | valve complete | ||
| flow | above seat | ||
| actuator type | plunger valve | ||
| main valve orifice 1 (inch) | 7/16 inch | ||
| pilot control orifice (mm) | 1,5 mm | ||
| kv value (water) | 1,8 m3/h | ||
| pilot control seal material | epdm (ethylene-propylene-diene rubber) | ||
| seat seal material | epdm (ethylene-propylene-diene rubber) | ||
| temperature environment max | 55 °c | ||
| temperature medium min | -30 °c | ||
| nominal pressure min | 0 bar | ||
| valve body cover material | stainless steel | ||
| voltage tolerance negative | 10 % | ||
| voltage frequency | 50 hz | ||
| voltage min / rated voltage | 24 v | ||
| port connection 2 thread type | g | ||
| port connection 1 thread type | g | ||
| port connection 1 type | inner thread | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818079 |
| medium-contacting part core material | stainless steel | ||
| inrush power consumption ac | 100 v·a | ||
| coil wiring overvoltage protection | without | ||
| coil insulation material (encasement) | epoxy | ||
| protection type ip (max. with suitable connector) | ip65 | ||
| electrical connection position | in direction of flow left | ||
| electrical connection number of contacts | 2 + grounding conductor | ||
| vacuum version | yes | ||
| switch time close max. | 2.000 ms | ||
| switch time open max. | 250 ms | ||
| switch function | on/off | ||
| main valve operating principle | diaphragm valve | ||
| operation | force-controlled | ||
| Typ | 290 | ||
| main valve orifice 1 (p) (mm) | 12 mm | ||
| qnn value (gas) | 1.900 l/min | ||
| rated power consumption | 10 w | ||
| sealing toward outside material | epdm (ethylene-propylene-diene rubber) | ||
| seat seal material category | elastomer | ||
| temperature medium max | 100 °c | ||
| nominal pressure max (liquid) | 16 bar | ||
| main valve wetted material | stainless steel | ||
| ac voltage | yes | ||
| voltage tolerance positive | 10 % | ||
| voltage max / rated voltage | 24 v | ||
| port connection 2 thread marking | 1/2 | ||
| port connection 2 type | inner thread | ||
| port connection 1 thread marking | 1/2 | ||
| Ventilfunktion | a - normally closed - inlet port 1 (p/nc) | ||
| fluidic port connection number | 2 |
Cookies sind kleine Textdateien, die die Benutzererfahrung auf Websites verbessern können.
Das Gesetz schreibt vor, dass wir unbedingt notwendige Cookies auf Ihrem Gerät speichern dürfen, um die ordnungsgemäße Funktion dieser Website zu gewährleisten. Für andere Arten von Cookies benötigen wir Ihre Zustimmung. Dies bedeutet, dass notwendige Cookies gemäß Art. 6 Abs. 1 lit. f DSGVO verarbeitet werden, während alle anderen Cookies, wie z. B. solche in den Kategorien Präferenzen und Marketing, gemäß Art. 6 Abs. 1 lit. a DSGVO verarbeitet werden.
cookies.cookies_about_type
Sie haben jederzeit die Möglichkeit, Ihre Zustimmung zu ändern oder zu widerrufen über die Cookie-Erklärung auf unserer Website.
Weitere Informationen über unsere Identität, wie Sie uns kontaktieren können und unsere Praktiken zur Verarbeitung personenbezogener Daten finden Sie in unserer Datenschutzerklärung.
