| r1a - Max fillet radius | 1,5 mm | ||
| Cb - Min clearance | 7 mm | ||
| Db min - Min OR shoulder diameter | 96 mm | ||
| Da min - Min shoulder diameter OR | 88 mm | ||
| da max - Max shoulder diameter IR | 67 mm | ||
| FTF - Characteristic cage frequency | 0,44 Hz | ||
| BPFO - Characteristic outer ring frequency | 9,69 Hz | ||
| Tmin - Min operating temperature | -40 °C | ||
| Nlim - Oil lubrication limit speed | 4700 tr/min | ||
| Y0 - Static axial load coefficient | 0,83 | ||
| A2 - Rating life coefficient | 1 | ||
| C0 - Static load | 164 kN | ||
| ISO 355 reference | T3CE060 | ||
| rs - Min fillet radius | 1,5 mm | ||
| T - Total width | 30 mm | ||
| Brand | NTN |
| ra max - Max fillet radius | 1,5 mm | ||
| Ca - Min clearance | 5 mm | ||
| Da max - Max shoulder diameter OR | 91,5 mm | ||
| db min - Min IR shoulder diameter | 68,5 mm | ||
| BSF - Characteristic rolling element frequency | 8,001 Hz | ||
| BPFI - Characteristic inner ring frequency | 12,31 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Grease lubrication limit speed | 3600 tr/min | ||
| Y2 - Upper axial load coefficient | 1,51 | ||
| e - Coefficient | 0,40 | ||
| Cu - Fatigue limit load | 20 kN | ||
| C - Dynamic load | 126 kN | ||
| r1s - Min fillet radius | 1,5 mm | ||
| a - Charge load application point | 23,5 mm | ||
| C - Outer ring width | 23 mm |
