| medium-contacting part stopper material | stainless steel | ||
| rated power ac | 16 v·a | ||
| coil special feature | for high temperatures | ||
| coil size | 42 mm | ||
| coil type | placed on top | ||
| protection type ip (max. with suitable connector) | ip65 | ||
| cable plug in delivery | not included | ||
| installation length | 126 mm | ||
| pilot control centrally bolted | yes | ||
| switch time close max. | 1.500 ms | ||
| switch time open max. | 400 ms | ||
| switch function | on/off | ||
| main valve operating principle | diaphragm valve | ||
| operation | servo-controlled | ||
| generation | ev | ||
| main valve orifice 1 (inch) | 1 1/2 inch | ||
| pilot control orifice (mm) | 2 mm | ||
| rated power consumption | 16 w | ||
| sealing toward outside material | epdm (ethylene-propylene-diene rubber) | ||
| seat seal material category | elastomer | ||
| temperature environment min | -30 °c | ||
| temperature medium min | -30 °c | ||
| nominal pressure max (liquid) | 10 bar | ||
| pilot control material medium-contacting | pa (polyamide) | ||
| valve body cover material | stainless steel | ||
| ac voltage | yes | ||
| voltage tolerance positive | 10 % | ||
| voltage max / rated voltage | 24 v | ||
| port connection 2 thread marking | 1 1/2 | ||
| port connection 2 type | inner thread | ||
| port connection 1 thread marking | 1 1/2 | ||
| Ventilfunktion | a - normally closed - inlet port 1 (p/nc) | ||
| fluidic port connection number | 2 |
| medium-contacting part core material | stainless steel | ||
| thermal insulation class of the actuator | h | ||
| coil wiring overvoltage protection | without | ||
| coil insulation material (encasement) | epoxy | ||
| kick and drop coil | energy saving technology possible | ||
| electrical connection position | in direction of flow left | ||
| electrical connection number of contacts | 2 + grounding conductor | ||
| core guide | sliding ring | ||
| nominal operation/duty cycle | 100 % | ||
| switch time close min | 900 ms | ||
| switch time open min | 300 ms | ||
| valve construction | valve complete | ||
| flow | above seat | ||
| actuator type | plunger valve | ||
| Typ | 6.213 | ||
| main valve orifice 1 (p) (mm) | 40 mm | ||
| kv value (water) | 30 m3/h | ||
| pilot control seal material | epdm (ethylene-propylene-diene rubber) | ||
| seat seal material | epdm (ethylene-propylene-diene rubber) | ||
| temperature environment max | 55 °c | ||
| temperature medium max | 100 °c | ||
| nominal pressure (din en 1333) | pn 10 | ||
| nominal pressure min | 0 bar | ||
| main valve wetted material | brass | ||
| valve seat material | brass | ||
| voltage tolerance negative | 10 % | ||
| voltage frequency | 50 hz | ||
| voltage min / rated voltage | 24 v | ||
| port connection 2 thread type | g | ||
| port connection 1 thread type | g | ||
| port connection 1 type | inner thread | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818079 |
Cookies sind kleine Textdateien, die die Benutzererfahrung auf Websites verbessern können.
Das Gesetz schreibt vor, dass wir unbedingt notwendige Cookies auf Ihrem Gerät speichern dürfen, um die ordnungsgemäße Funktion dieser Website zu gewährleisten. Für andere Arten von Cookies benötigen wir Ihre Zustimmung. Dies bedeutet, dass notwendige Cookies gemäß Art. 6 Abs. 1 lit. f DSGVO verarbeitet werden, während alle anderen Cookies, wie z. B. solche in den Kategorien Präferenzen und Marketing, gemäß Art. 6 Abs. 1 lit. a DSGVO verarbeitet werden.
cookies.cookies_about_type
Sie haben jederzeit die Möglichkeit, Ihre Zustimmung zu ändern oder zu widerrufen über die Cookie-Erklärung auf unserer Website.
Weitere Informationen über unsere Identität, wie Sie uns kontaktieren können und unsere Praktiken zur Verarbeitung personenbezogener Daten finden Sie in unserer Datenschutzerklärung.
