| medium-contacting part stopper material | stainless steel | ||
| reduced power dc | 10 w | ||
| thermal insulation class of the actuator | h | ||
| coil wiring overvoltage protection | without | ||
| coil insulation material (encasement) | epoxy | ||
| kick and drop coil | energy saving technology not available | ||
| electrical connection position | in direction of flow left | ||
| electrical connection number of contacts | 2 + grounding conductor | ||
| pilot control centrally bolted | yes | ||
| switch time close max. | 400 ms | ||
| switch time open max. | 100 ms | ||
| switch function | on/off | ||
| main valve operating principle | diaphragm valve | ||
| operation | servo-controlled | ||
| generation | ev | ||
| main valve orifice 1 (inch) | 1/2 inch | ||
| pilot control orifice (mm) | 1,1 mm | ||
| kv value (water) | 3,6 m3/h | ||
| pilot control seal material | fkm (fluor rubber) | ||
| seat seal material | fkm (fluor rubber) | ||
| temperature environment max | 55 °c | ||
| temperature medium max | 120 °c | ||
| nominal pressure (din en 1333) | pn 10 | ||
| nominal pressure min | 0 bar | ||
| main valve wetted material | brass | ||
| valve seat material | brass | ||
| dc voltage | yes | ||
| voltage tolerance positive | 10 % | ||
| voltage min / rated voltage | 24 v | ||
| port connection 2 thread type | g | ||
| port connection 1 thread type | g | ||
| port connection 1 type | inner thread | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818079 |
| medium-contacting part core material | stainless steel | ||
| rated power dc | 10 w | ||
| coil special feature | for high temperatures | ||
| coil size | 40 mm | ||
| coil type | placed on top | ||
| protection type ip (max. with suitable connector) | ip65 | ||
| cable plug in delivery | not included | ||
| installation length | 58 mm | ||
| nominal operation/duty cycle | 100 % | ||
| switch time close min | 200 ms | ||
| switch time open min | 50 ms | ||
| valve construction | valve complete | ||
| flow | above seat | ||
| actuator type | plunger valve | ||
| Typ | 6.213 | ||
| main valve orifice 1 (p) (mm) | 13 mm | ||
| qnn value (gas) | 3.900 l/min | ||
| rated power consumption | 10 w | ||
| sealing toward outside material | fkm (fluor rubber) | ||
| seat seal material category | elastomer | ||
| temperature environment min | 0 °c | ||
| temperature medium min | 0 °c | ||
| nominal pressure max (liquid) | 10 bar | ||
| pilot control material medium-contacting | pa (polyamide) | ||
| valve body cover material | stainless steel | ||
| battery voltage | yes | ||
| voltage tolerance negative | 10 % | ||
| voltage max / rated voltage | 24 v | ||
| port connection 2 thread marking | 1/2 | ||
| port connection 2 type | inner thread | ||
| port connection 1 thread marking | 1/2 | ||
| Ventilfunktion | a - normally closed - inlet port 1 (p/nc) | ||
| fluidic port connection number | 2 |
Cookies sind kleine Textdateien, die die Benutzererfahrung auf Websites verbessern können.
Das Gesetz schreibt vor, dass wir unbedingt notwendige Cookies auf Ihrem Gerät speichern dürfen, um die ordnungsgemäße Funktion dieser Website zu gewährleisten. Für andere Arten von Cookies benötigen wir Ihre Zustimmung. Dies bedeutet, dass notwendige Cookies gemäß Art. 6 Abs. 1 lit. f DSGVO verarbeitet werden, während alle anderen Cookies, wie z. B. solche in den Kategorien Präferenzen und Marketing, gemäß Art. 6 Abs. 1 lit. a DSGVO verarbeitet werden.
cookies.cookies_about_type
Sie haben jederzeit die Möglichkeit, Ihre Zustimmung zu ändern oder zu widerrufen über die Cookie-Erklärung auf unserer Website.
Weitere Informationen über unsere Identität, wie Sie uns kontaktieren können und unsere Praktiken zur Verarbeitung personenbezogener Daten finden Sie in unserer Datenschutzerklärung.
