| medium-contacting part stopper material | stainless steel | ||
| rated power ac | 16 v·a | ||
| reduced power dc | 8 w | ||
| thermal insulation class of the actuator | b | ||
| coil size | 32 mm | ||
| coil type | placed on top | ||
| kick and drop coil | energy saving technology possible | ||
| electrical connection position | in direction of flow left | ||
| electrical connection number of contacts | 2 + grounding conductor | ||
| core guide | sliding ring | ||
| switch time close max. | 250 ms | ||
| switch time open max. | 40 ms | ||
| switch function | on/off | ||
| main valve operating principle | globe valve | ||
| operation | servo-controlled | ||
| Typ | 5.404 | ||
| main valve orifice 1 (p) (mm) | 12 mm | ||
| kv value (water) | 2 m3/h | ||
| pilot control seal material | ptfe (polytetrafluorethylene) | ||
| seat seal material | ptfe (polytetrafluorethylene) | ||
| temperature environment max | 55 °c | ||
| temperature medium max | 100 °c | ||
| nominal pressure max (liquid) | 40 bar | ||
| nominal pressure min | 1 bar | ||
| valve seat material | brass | ||
| voltage tolerance negative | 10 % | ||
| voltage frequency | 50/60 hz | ||
| voltage min / rated voltage | 230 v | ||
| port connection 3 thread type | g | ||
| port connection 2 thread marking | 1/2 | ||
| port connection 2 type | inner thread | ||
| port connection 1 thread marking | 1/2 | ||
| Ventilfunktion | b - normally open - inlet port 1 (p/no) | ||
| fluidic port connection number | 2 |
| medium-contacting part core material | stainless steel | ||
| inrush power consumption ac | 24 v·a | ||
| rated power dc | 8 w | ||
| coil wiring overvoltage protection | without | ||
| coil insulation material (encasement) | pa (polyamide) | ||
| sliding ring material | ptfe (polytetrafluorethylene) | ||
| protection type ip (max. with suitable connector) | ip65 | ||
| cable plug in delivery | not included | ||
| installation length | 65 mm | ||
| nominal operation/duty cycle | 100 % | ||
| switch time close min | 100 ms | ||
| switch time open min | 20 ms | ||
| valve construction | valve complete | ||
| flow | above seat | ||
| actuator type | plunger valve | ||
| main valve orifice 1 (inch) | 7/16 inch | ||
| qnn value (gas) | 2.200 l/min | ||
| rated power consumption | 8 w | ||
| sealing toward outside material | fkm (fluor rubber) | ||
| seat seal material category | plastics | ||
| temperature environment min | -10 °c | ||
| temperature medium min | -10 °c | ||
| nominal pressure max (gas) | 32 bar | ||
| main valve wetted material | brass | ||
| ac voltage | yes | ||
| voltage tolerance positive | 10 % | ||
| voltage max / rated voltage | 230 v | ||
| port connection 3 thread marking | 1/8 | ||
| port connection 3 type | outer thread | ||
| port connection 2 thread type | g | ||
| port connection 1 thread type | g | ||
| port connection 1 type | inner thread | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818079 |
Cookies sind kleine Textdateien, die die Benutzererfahrung auf Websites verbessern können.
Das Gesetz schreibt vor, dass wir unbedingt notwendige Cookies auf Ihrem Gerät speichern dürfen, um die ordnungsgemäße Funktion dieser Website zu gewährleisten. Für andere Arten von Cookies benötigen wir Ihre Zustimmung. Dies bedeutet, dass notwendige Cookies gemäß Art. 6 Abs. 1 lit. f DSGVO verarbeitet werden, während alle anderen Cookies, wie z. B. solche in den Kategorien Präferenzen und Marketing, gemäß Art. 6 Abs. 1 lit. a DSGVO verarbeitet werden.
cookies.cookies_about_type
Sie haben jederzeit die Möglichkeit, Ihre Zustimmung zu ändern oder zu widerrufen über die Cookie-Erklärung auf unserer Website.
Weitere Informationen über unsere Identität, wie Sie uns kontaktieren können und unsere Praktiken zur Verarbeitung personenbezogener Daten finden Sie in unserer Datenschutzerklärung.
