Technische Daten
| Baureihe (VPWS) | Proportional directional control valve |
|---|---|
| Nominal width [mm] (1.5) | 1,50 |
| Directional control valve type (B) | Sub-base valve |
| Ventilfunktion (6) | 2/2-way valve, normally closed |
| Pneumatischer Anschluss (PC15) | Cartridge 15 mm |
|---|---|
| Pressure range [bar] (8) | 0 ... 8 |
| Sealant (V) | FPM |
| Nennweite | 1,5 mm | ||
| Dichtprinzip | Soft | ||
| Konstruktiver Aufbau | Directly actuated poppet valve | ||
| Steuerart | Direct | ||
| Symbol | 00995954 | ||
| Betriebsdruck | 0 bar ... 8 bar | ||
| Standard flow rate | 82 l/min ... 98 l/min | ||
| Max. Schaltfrequenz | 18 Hz | ||
| Max. elektrische Leistungsaufnahme | 2,5 W | ||
| Einschaltdauer | 100% (operating current < 155 mA) | ||
| Medium | Inert gases Air Oxygen | ||
| Mediumstemperatur | 5 °C ... 50 °C | ||
| Hinweis zur Schutzart | IP65 with suitable plug In assembled state | ||
| Lagertemperatur | -40 °C ... 80 °C | ||
| Elektrischer Anschluss 1, Anschlussart | Cable | ||
| Elektrischer Anschluss 1, Anzahl Pole/Adern | 2 | ||
| Befestigungsart | On sub-base Plug-in With accessories | ||
| Pneumatischer Anschluss 2 | Cartridge 7.2 mm | ||
| Werkstoff Dichtungen | FPM |
| Betätigungsart | Electric | ||
| Einbaulage | optional | ||
| Rückstellart | Mechanical spring | ||
| Strömungsrichtung | Non-reversible | ||
| Ventilfunktion | 2/2 proportional directional control valve, closed | ||
| Nennbetriebsdruck | 8 bar | ||
| Hysterese | 16 mA | ||
| Current regulating range | 0 mA ... 200 mA | ||
| Coil resistance R20 | 60,5 Ohm | ||
| Korrosionsbeständigkeitsklasse KBK | 1 - Low corrosion stress | ||
| Note on the medium | Lubricated operation not possible Maximum particle size 10 µm | ||
| Schutzart | IP60 | ||
| Umgebungstemperatur | 5 °C ... 50 °C | ||
| Produktgewicht | 23 g | ||
| Elektrischer Anschluss 1, Anschlusstechnik | Open end | ||
| Kabellänge | 0,07 m ... 0,08 m | ||
| Pneumatischer Anschluss 1 | Cartridge 15 mm | ||
| Werkstoff-Hinweis | Contains paint-wetting impairment substances RoHS-compliant | ||
| Werkstoff Gehäuse | High-alloy steel |