| Werkstoff Gehäuse | Anodised wrought aluminium alloy | ||
| Material mounting adaptor | Galvanised steel | ||
| Pneumatischer Anschluss 3 | G1/4 | ||
| Pneumatischer Anschluss 1 | G1/4 | ||
| Produktgewicht | 218 g | ||
| Note on ambient temperature | Influence of heat on wear | ||
| Mediumstemperatur | -10 °C ... 60 °C | ||
| Korrosionsbeständigkeitsklasse KBK | 1 - Low corrosion stress | ||
| Betriebsmedium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
| Cam angle | 30 deg | ||
| Max. actuating speed with lateral actuation | 0,7 m/s | ||
| Symbol | 00991348 | ||
| Steuerart | Direct | ||
| Dichtprinzip | Soft | ||
| Nennweite | 6 mm | ||
| Rückstellart | Mechanical spring | ||
| Betriebsdruck | -0,95 bar ... 10 bar | ||
| Standard nominal flow rate | 870 l/min | ||
| Betätigungsart | Mechanical |
| Werkstoff Dichtungen | NBR | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Pneumatischer Anschluss 2 | G1/4 | ||
| Befestigungsart | With through-hole | ||
| Actuating force | 32,7 N | ||
| Umgebungstemperatur | -10 °C ... 60 °C | ||
| LABS-Konformität | VDMA24364-B1/B2-L | ||
| Hinweis zum Betriebs-/Steuermedium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosionsschutz | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| Max. Schaltfrequenz | 3 Hz | ||
| Überdeckung | Zero overlap | ||
| Strömungsrichtung | Reversible | ||
| Einbaulage | optional | ||
| Anwendungshinweis | Risk of pinching | ||
| Max. stroke limit (hard) | 11 mm | ||
| Konstruktiver Aufbau | One-way roller lever with idle return Poppet seat | ||
| Pneumatischer Arbeitsanschluss | G1/4 | ||
| Baubreite | 20 mm | ||
| Ventilfunktion | 3/2-way, single solenoid |
