R182122110 Bosch Rexroth

REXROTH R182122110 ROLLENWAGEN KOHLENSTOFFSTAHL

Name: R182122110 REXROTH
Brand: REXROTH
SKU: 113779-de-eur
Price: 225.28 EUR
Availability: InStock

RWA-025-SNH-C2-S-2

225,28 €

verfügbar mit 7 bis 15 Tagen Lieferzeit nach United States

Finden Sie Ihre passende Kombination! Klicken Sie hier, um passende Führungsleisten für diesen Laufwagen zu entdecken

Technische Daten

Roller runner block CS, made of Carbon steel

Baureihe (R1821)	Slimline, normal, high R1821...2
Baugröße (2)	25 size
Vorspannungsklasse (2)	C2 Average preload

Genauigkeitsklasse (1)	SP Super Precision Accuracy Level
Dichtungen (10)	SS standard seal

Dimensions
Technical data

^a) For O-ring: Size 25: Ø 5 · 1.5 (mm). Open the lube port if required. Please request instructions. For new designs, use the runner blocks for lubrication from above.
^b) Recommended position for pin holes (see general technical notes and information in the "Maintenance" section). Pre-drilled holes may be present at this position for manufacturing reasons. They are suitable for drilling out.
^c) Lube nipple, thread M6 – 8 deep: Connection is only possible on end-face. Dimensions differ among different connection pieces. See "Accessories" for more information about lube fittings.
^d) For guide rails of accuracy class H, this base area may be without a slot for manufacturing reasons.

Industriekomponente		48
A₂		23
B		91
B₂		93
d₈		6
E₁		35
E₈		33.4
E₉		12.4
H		40
Dimension H₂ mit Abdeckstreifen		23.6
K₁		19.1
N₅		9.5
S₂		M6
S₉ (Thread for adjoining parts)		M3 ‒ 5 mm deep
V₁		7.5

A₁		24
A₃		12.5
B₁		63.5
B₃		97
d_8.2		5
E₂		35
E_8.2		40.22
E_9.2		25.4
H₁		34
Dimension H₂ ohne Abdeckstreifen		23.4
N₃		9
N₆		14.3 mm ±0.5
ØS₅		7
T₂ (Dimension T2 = hole spacing in the roller guide rail)		30

a_max (Prerequisite: There must be preload, even during operation under load.)		150
Maschinenschutz		0.6
Mikro (Without friction of seal)		0.0004 ... 0.001
Betriebsbedingungen		Operating conditions

v_max (Speeds of up to 4 m/s are possible. Service life is limited by wear of plastic parts.)		3
F_R (Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. )		30
Material		CS
Zulässige Umgebungstemperatur (min ... max) (Brief peaks up to 100 °C are permitted. For even lower sub-zero temperatures, please consult us. )		-10 °C ... +80 °C