Roller guide rail with cover strip and threaded holes on end faces.
Retention with screw-down protective caps made of
plastic, or alternatively with screws and washers
(included).
a)
For Roller Guide Rails of accuracy class H, this
base area may be without a groove for manufacturing reasons.
| D | 24 | mm | |
| N6 | 28.7 mm ±0.5 | ||
| N8 | 20 | mm | |
| N10 | 4,35 | mm | |
| Drehmoment | 60 | mm | |
| T1 s (Preferred dimension T1S with tolerances ± 0.75 ,With a shortfall of T1 min a front thread is not possible. Secure the cover strip! See instruction for mounting ) | 28 | mm |
| Dimension H2 mit Abdeckstreifen (with cover strip 0.3 mm) | 47,85 | mm | |
| N7 | 30 | mm | |
| N9 | 7 | mm | |
| ØS5 | 16 | mm | |
| T1 min | 20 | mm | |
| nB | 66 |
| Maschinenschutz | 13,10 | kg | |
| Betriebsbedingungen | Operating conditions | ||
| Zulässige Umgebungstemperatur (min ... max) (Brief peaks up to 100 °C are permitted. For even lower sub-zero temperatures, please consult us. ) | -10 °C ... +80 °C |
| Lmax (Deliverable in one part up to a length of 5936 mm) | 3.956 | mm | |
| Baugröße | 55 |
