a)
Reference edge
b)
Length
| B (Recommended design: No reference edge on opposite side (V1) and align parallel over shafts. ) | 42 | ||
| H1 (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 72 | mm | |
| H2 (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 12.5 mm ±0.012 | ||
| O1 (ISO 4762-8.8) | M10x60 | ||
| Drehmoment | 75 | mm | |
| T2 | 13,50 | mm | |
| Ventil | 25 | mm |
| e | 21 | ||
| H2 | 12,50 | mm | |
| Maschinenschutz | 11 | ||
| O2 (ISO 4762-8.8, recommendation applies for bolting in steel or cast iron threads.) | M10x25 | ||
| T1 | 15,30 | mm | |
| U (DIN 7980, discontinued. Spring washer commercially available.) | 10 | ||
| V1 (Recommended design: No reference edge on opposite side (V1) and align parallel over shafts. ) | 7 | mm |
| Linie | 600 | mm | |
| Maschinenschutz | 2,10 | kg |
| Toleranz für L | - 500 µm - 1500 µm |
