| D | 62 | mm | |
| C | 80 | mm | |
| C2 | 2,15 | ||
| e (Minimum size in relation to shaft Ø d) | 16,80 | ||
| K3 | 27,50 | mm |
| Industriekomponente | 60 | mm | |
| C1 | 60,30 | H13 | |
| D1 | 59 | mm | |
| K2 | 9,50 | mm | |
| S3 (Holes at center of dimension C) | 3.5 mm +0.1 |
| amax | 150 | m/s² | |
| Maschinenschutz | 0,50 | kg | |
| Losbrechkraft (One wiper seal: Multiply by a factor of 0.5.) | 12 | N | |
| Kugelreihen | 10 | ||
| Radialspiel der Welle h6/Bohrung K7 | + 29 - 7 |
||
| Betriebsbedingungen | Operating conditions |
| vmax | 5 | m/s | |
| FR (One wiper seal: Multiply by a factor of 0.5.,Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 5 | N | |
| Maschinenschutz (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) | 0,001 ... 0,004 | ||
| Radialspiel der Welle h6/Bohrung H7 | + 50 + 12 |
||
| Radialspiel der Welle h6/Bohrung M7 | + 20 - 18 |
||
| Zulässige Umgebungstemperatur (min ... max) | -20 °C ... +80 °C |
