| Baureihe | Compact (C) | ||
| Max. Beschleunigung amax | 150 m/s² | ||
| Länge Kugelbüchse | 24 mm | ||
| Zulässige Umgebungstemperatur | -10 °C ... +80 °C | ||
| Reibungskoeffizient der Fußnote μ | Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. | ||
| Fußnote Reibkraft FR | One wiper seal: Multiply by a factor of 0.5. | ||
| Fußnote minimale dynamische Tragfähigkeit Cmin | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. | ||
| Fußnote minimale statische Tragfähigkeit C0min | The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
| Maximale dynamische Tragfähigkeit Cmax | 580 N | ||
| Maximal zulässige lineare Geschwindigkeit vmax | 5 m/s | ||
| Außendurchmesser d | 15 mm | ||
| Reibungszahl μ | 0,001 ... 0,004 | ||
| Fußnote Losbrechkraft | One wiper seal: Multiply by a factor of 0.5. | ||
| Fußnote maximale dynamische Tragfähigkeit Cmax | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. | ||
| Losbrechkraft | 0.8 N | ||
| Fußnote maximale statische Tragfähigkeit C0max | The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |