| Gewicht | 5.07063 lb | ||
| resistance | 1000 vp-p, pulse width 1 ?s, rise time 1 ns | ||
| Versorgungsspannung | 24 vdc (ripple ?10% or less) | ||
| response time | 1 sec. or less | ||
| temperature characteristics | ?2.0% f.s. or less (0 to 50c, based on 25c) | ||
| repeatability | ?1.0% f.s. or less (0.7 mpa, at 20c), ?3.0% of f.s. or less in case of analog output | ||
| accumulated flow range | 0 to 9,999,999,999 l | ||
| proof pressure | 2.25 mpa | ||
| note 2)display units | l, m3, m3 x 103, ft3, ft3 x 103, ft3 x 106 | ||
| rated flow range note 1) | 600 to 12000 l/min | ||
| measured fluid | dry air, nitrogen |
| port size (rc, npt, g) | 2 | ||
| Stromaufnahme | 150 ma or less | ||
| Hysterese | hysteresis mode: variable (can be set from 0); window comparator mode: (can be set from 0 to 3% f.s.) | ||
| output specifications | output current: 4 to 20 ma; load impedance: 250 or less | ||
| pressure characteristics | ?1.5% f.s. or less (0.1 to 1.5 mpa, based on 0.7 mpa) | ||
| linearity note 3) | ?1.5% f.s. or less (0.7 mpa, at 20c) | ||
| pressure loss | 20 kpa (at maximum flow rate) | ||
| operating pressure range | 0.1 to 1.5 mpa | ||
| minimum set unit note 1) | 10 l/min | ||
| detection type | heater type | ||
| Baureihe | pf2a712h |
