| Bore diameter bearing | d | 17 | mm |
| Width inner ring, | B | 14 | mm |
| Basic static load rating, radial | C0r | 40,100 |
| Outside diameter bearing | D | 30 | mm |
| Basic dynamic load rating, radial | Cr | 21,300 | |
| Radialluft | Gr | 0,03 - 0,082 |
| Edge Spacing | r1smin | 0,30 | mm |
| Ball diameter | dK | 25 | mm |
| Outer eye diameter | d2 | 46 | mm |
| Shank Length Welding Head | h2 | 35 | mm |
| Tilt angle | α | 10 | ° |
| Distance drilling with/shaft start | l7 | 23 | mm |
| Centering pin diameter | d7 | 4 | mm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Outer flange diameter inner ring | d1 | 20,70 | mm |
| Welding Shank Diameter | d 7 | 24 | mm |
| Width of the rod end | C1 | 11 | mm |
| Total length welding head | l6 | 58 | mm |
| Chamfer | l8 | 3 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
