| Bore diameter bearing | d | 10 | mm |
| Width inner ring | B | 9 | mm |
| Basic static load rating, radial | C0r | 22,000 |
| Outside diameter bearing | D | 19 | mm |
| Basic dynamic load rating, radial | Cr | 8,640 |
| Edge Spacing | r1smin | 0,30 | mm |
| Ball diameter | dK | 16 | mm |
| Outer eye diameter | d2 | 29 | mm |
| Shank diameter | d4 | 15 | mm |
| Width of the rod end | C1 | 7 | mm |
| Thread length Internal thread | l3 | 20 | mm |
| length rod end shank | l5 | 6,50 | mm |
| Shank diameter, large | d5 | 19 | mm |
| Radialluft | Gr | 0 - 0,032 | |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Outer flange diameter inner ring | d1 | 13,20 | mm |
| Thread size | d3 | M10 | |
| Shank Length Internal thread head | h1 | 43 | mm |
| Tilt angle | α | 12 | ° |
| Total length internal thread head | l4 | 57,50 | mm |
| Distance drilling with/shaft start | l7 | 15 | mm |
| Width Across Flat | W | 17 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Hersteller | Teilenummer |
|---|---|
| SKF | SI10 C (SKF) |
| SKF | SI10DC |
| Askubal | EJ10-D |
| Durbal | EF10-20-501 (DURBAL) |
