| Ball diameter | dK | 105 | mm |
| Outer eye diameter | d2 | 176 | mm |
| Shank diameter | d4 | 102 | mm |
| Width of the rod end | C1 | 60 | mm |
| Thread length Internal thread | l3 | 81 | mm |
| Distance drilling with/shaft start | l7 | 80 | mm |
| Shank diameter, large | d5 | 125 | mm |
| Radialluft | Gr | 0,055 - 0,142 | |
| Bore diameter bearing, lower tolerance | dUT | -0,02 | mm |
| Outer flange diameter inner ring | d1 | 89,40 | mm |
| Thread size | d3 | M80x2 | |
| Shank Length Internal thread head | h1 | 170 | mm |
| Tilt angle | α | 6 | ° |
| Total length internal thread head | l4 | 265 | mm |
| Welding Shank Diameter | d 7 | M16x50 | |
| Edge Spacing | r1smin | 1 | mm |
| Anziehdrehmoment | MA | 195 | Nm |
| Width inner ring, lower tolerance | BUT | -0,15 | mm |
| Bore diameter bearing | d | 80 | mm |
| Width inner ring, | B | 55 | mm |
| Basic static load rating, radial | C0r | 551,000 |
| Outside diameter bearing | D | 120 | mm |
| Basic dynamic load rating, radial | Cr | 402,000 |
