| Ball diameter | dK | 66 | mm |
| Outer eye diameter | d2 | 116 | mm |
| Shank diameter | d4 | 61 | mm |
| Width of the rod end | C1 | 40 | mm |
| Thread length Internal thread | l3 | 46 | mm |
| Distance drilling with/shaft start | l7 | 55 | mm |
| Shank diameter, large | d5 | 88 | mm |
| Radialluft | Gr | 0,043 - 0,12 | |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Outer flange diameter inner ring | d1 | 56 | mm |
| Thread size | d3 | M45x1,5 | |
| Shank Length Internal thread head | h1 | 105 | mm |
| Tilt angle | α | 6 | ° |
| Total length internal thread head | l4 | 163 | mm |
| Welding Shank Diameter | d 7 | M12x35 | |
| Edge Spacing | r1smin | 0,60 | mm |
| Anziehdrehmoment | MA | 110 | Nm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing | d | 50 | mm |
| Width inner ring, | B | 35 | mm |
| Basic static load rating, radial | C0r | 333,000 |
| Outside diameter bearing | D | 75 | mm |
| Basic dynamic load rating, radial | Cr | 157,000 |
| Hersteller | Teilenummer |
|---|---|
| SKF | SIR50 ES (SKF) |
