| Width Outer ring | C | 15 | mm |
| Inner diameter of housing washer | D1 | 35,70 | mm |
| Ball diameter | dK | 47 | mm |
| Height, lower tolerance | TUT | -0,25 | mm |
| Outside diameter, lower tolerance | Do UT | -0,02 | mm |
| Tilt angle | α | 2,40 | ° |
| Plane Surface Spacing | s | 1 | mm |
| Width Inner ring | B | 15 | mm |
| Connection measure Inner ring | d2 | 42 | mm |
| Width inner ring, lower tolerance | BUT | -0,20 | mm |
| Height, upper tolerance | TOT | 0,25 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Distance lubrication Bore | A | 8 | mm |
| Connection diameter | Db min | 47,50 | mm |
| Connection measure Inner ring | da max | 34,40 | mm |
| Housing Connection Diameter | Da min | 40 | mm |
| Edge Spacing | r1smin | 0,30 | mm |
| Basic static load rating, radial | C0r | 288,000 | |
| Höhe | T | 16 | mm |
| Inner diameter bearing | d | 28 | mm |
| Basic dynamic load rating, radial | Cr | 57,700 | |
| Outside diameter bearing | D | 52 | mm |
