| Material spindle | Rolled steel | ||
| Werkstoff Kolbenstange | High-alloy stainless steel | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Logic interface, plug pattern | 00992264 | ||
| Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 | ||
| Switching logic for inputs | NPN (negative switching) PNP (positive switching) | ||
| Max. Leitungslänge | 15 m outputs 15 m inputs 20 m with IO-Link® operation | ||
| IO-Link, minimale Zykluszeit | 1 ms | ||
| IO-Link, Prozessdateninhalt IN | 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out) | ||
| IO-Link, Prozessdateninhalt OUT | 1-bit (move in) 1-bit (move out) 1-bit (quit error) | ||
| IO-Link, Number of ports | 1 | ||
| IO-Link, Communication mode | COM3 (230.4 kBaud) | ||
| IO-Link, SIO-Mode Unterstützung | Yes | ||
| Working range of logic input | 24 V | ||
| Number of digital logic inputs | 2 | ||
| Gewichtszuschlag pro 10 mm Hub | 41 g | ||
| Produktgewicht | 1.800 g | ||
| Bewegte Masse bei 0 mm Hub | 179 g | ||
| Reference value effective load, horizontal | 40 kg | ||
| Max. radial force at drive shaft | 180 N | ||
| Max. Moment My | 2,9 Nm | ||
| Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C. | ||
| Schutzart | IP40 | ||
| Lagertemperatur | -20 °C ... 60 °C | ||
| Korrosionsbeständigkeitsklasse KBK | 0 - No corrosion stress | ||
| Schwingfestigkeit | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
| CE-Zeichen (siehe Konformitätserklärung) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Zulassung | RCM trademark | ||
| Power supply, number of pins/wires | 4 | ||
| Power supply, connection type | Plugs | ||
| Rotor position transducer resolution | 16 bit | ||
| Nominal current | 3 A | ||
| Max. Stromaufnahme | 3.000 mA | ||
| Insulation protection class | B | ||
| Features of digital logic outputs | Configurable Not galvanically isolated | ||
| Max. Geschwindigkeit | 0,23 m/s | ||
| Betriebsbereitschaftsanzeige | LED | ||
| Zusatzfunktionen | User interface Integrated end-position sensing | ||
| Rotor position sensor | Absolute single-turn encoder | ||
| Verdrehsicherung/Führung | With plain-bearing guide | ||
| Spindle type | Ball screw drive | ||
| Type of motor | Stepper motor | ||
| Einbaulage | optional | ||
| Spindle pitch | 10 mm/U | ||
| Reversing backlash theoretical | 100 µm | ||
| Stroke reserve | 0 mm | ||
| Baugröße | 45 |
| Material spindle nut | Steel | ||
| Werkstoff Gehäuse | Smooth-anodised wrought aluminium alloy | ||
| Befestigungsart | Via female thread With accessories | ||
| Logic interface, number of pins/wires | 8 | ||
| Logic interface, connection type | Plug | ||
| Switching logic for outputs | NPN (negative switching) PNP (positive switching) | ||
| IO-Link, Datenspeicher benötigt | 500 Byte | ||
| IO-Link, Servicedateninhalt IN | 32-bit force 32-bit position 32-bit speed | ||
| IO-Link, Prozessdatenbreite IN | 2 bytes | ||
| IO-Link, Prozessdatenbreite OUT | 2 bytes | ||
| IO-Link, Port class | A | ||
| IO-Link, Protokollversion | Device V 1.1 | ||
| Features of logic input | Configurable Not galvanically isolated | ||
| Specification logic input | Based on IEC 61131-2, type 1 | ||
| Number of digital logic outputs 24 V DC | 2 | ||
| Grundgewicht bei 0 mm Hub | 1.185 g | ||
| Zuschlag bewegte Masse pro 10 mm Hub | 4,9 g | ||
| Reference value effective load, vertical | 13 kg | ||
| Max. feed force Fx | 250 N | ||
| Max. Moment Mz | 2,9 Nm | ||
| Max. Moment Mx | 0 Nm | ||
| Umgebungstemperatur | 0 °C ... 50 °C | ||
| Relative Luftfeuchtigkeit | 0 - 90% Non-condensing | ||
| LABS-Konformität | VDMA24364 zone III | ||
| Schockfestigkeit | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| KC-Zeichen | KC-EMV | ||
| Power supply, connection pattern | 00995989 | ||
| power supply, connection system | M12x1, T-coded according to EN 61076-2-111 | ||
| Zulässige Spannungsschwankungen | +/- 15% | ||
| Parameterisation interface | IO-Link User interface | ||
| Nominal voltage DC | 24 V | ||
| Max. current digital logic outputs | 100 mA | ||
| Einschaltdauer | 100% | ||
| Wiederholgenauigkeit | ±0.02 mm | ||
| Max. acceleration | 5 m/s² | ||
| Anzeige | LED | ||
| Rotor position sensor, encoder measuring principle | Magnetic | ||
| Referencing | Positive fixed stop block Negative fixed stop block Reference switch | ||
| Symbol | 00997294 | ||
| Konstruktiver Aufbau | Electric cylinder With ball screw drive With integrated drive | ||
| Kolbenstangenende | Male thread | ||
| Max. Verdrehwinkel der Kolbenstange +/- | 1 deg | ||
| Spindle diameter | 10 mm | ||
| Kolbenstangengewinde | M10x1.25 | ||
| Hub | 150 mm |
