8069731 Festo

FESTO 8069731 Integrierter Antrieb

Name: 8069731 FESTO
Brand: FESTO
SKU: 691597-de-eur
Price: 1324.56 EUR
Availability: SoldOut

EMCA-EC-67-S-1TM-EC

1.324,56 €

Begrenzter Lagerbestand nur auf Anfrage erhältlich

Technische Daten

Baureihe (EMCA)	Motor with controller
Motor type (EC)	EC motor
Flange size, motors (67)	67
Length (S)	Short
Nominal operating voltage (1)	24 V DC

Elektrischer Anschluss (T)	Terminal box
Measuring unit (M)	Absolute encoder, multi-turn
Brake	None
Bus protocol/activation (EC)	EtherCAT®
Degree of protection, electrical system	Standard

Technical data

Werkstoff-Hinweis		Contains paint-wetting impairment substances RoHS-compliant
Switching logic for outputs		PNP (positive switching)
Ethernet, supported protocols		TCP/IP
Working range of logic input		24 V
Communication profile		CiA402 FHPP
Number of digital logic outputs 24 V DC		2
Proof test interval		20 y
Permissible axial shaft load		60 N
Nenn-Anziehdrehmoment		0,37 Nm
Note on ambient temperature		Power must be reduced by 1.75% per °C at ambient temperatures above 20°C.
Schutzart		IP54
Media redundancy		Ring redundancy
Schockfestigkeit		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
CE-Zeichen (siehe Konformitätserklärung)		To EU EMC Directive To EC Machinery Directive
KC-Zeichen		KC-EMV
Zulässige Spannungsschwankungen		+/- 20 %
Max. output motor		158 W
Max. number of process sets		64
SFF Safe Failure Fraction		> 90 %
Parameterisation interface		Ethernet
Nominal voltage DC		24 V
Max. negative test pulse with 1 signal		600 µs
Max. current digital logic outputs		100 mA
Features of digital logic outputs		Freely configurable in some cases Not galvanically isolated
Brake resistor, external		6 Ohm
Nominal rotary speed		3.100 rpm
Anzeige		LED
Safety Integrity Level (SIL)		Safe torque off (STO)/SIL 2
Zusatzfunktionen		CoE (CSP only) Distributed clocks Emergency message Variable PDO mapping
Protective function		I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring Software end-position detection
Rotor position sensor		Absolute multi-turn encoder
Configuration support		ESI file

Befestigungsart		Screw-clamped With through-hole
Switching logic for inputs		PNP (positive switching)
Features of logic input		Galvanically connected to logic potential
Specification logic input		Based on IEC 61131-2
Number of digital logic inputs		2
Produktgewicht		1.925 g
Permissible radial shaft load		100 N
Peak torque		0,85 Nm
Mass moment of inertia of rotor		0,175 kgcm²
Umgebungstemperatur		0 °C ... 50 °C
Relative Luftfeuchtigkeit		0 - 95% Non-condensing
Lagertemperatur		-25 °C ... 70 °C
Schwingfestigkeit		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Zertifikat ausstellende Stelle		TÜV 01/205/5514.00/16 UL E331130
Zulassung		RCM trademark c UL us - Recognized (OL)
Peak current		10,2 A
Rotor position transducer resolution		12 bit
Operating time absolute encoder		With external battery: up to 6 months Note: the maximum service life of the battery depends on its charging status, the ambient temperature and ageing effects. Without external battery: 3 days (worst case) up to max. 7 days (best case) Note: The maximum storage time depends on the charge state of the internal capacitor, ambient temperature and ageing effects.
Protokoll		EtherCAT
Nominal current		6,9 A
Nominal power rating of motor		120 W
Max. positive test pulse with 0 signal		10.000 µs
Hardware fault tolerance		1
Diagnostic coverage		90 %
Baud rate		10/100 Mbit/s (full/half)
Drehzahl max.		3.500 rpm
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level d
Sicherheitsfunktion		Safe torque off (STO)
Topologies		Star Ring Line
Rotor position sensor, encoder measuring principle		Magnetic
Min. cycle time		2 ms
Controller operating mode		PWM MOSFET power output stage Cascade controller with P position controller PI speed controller PI current regulator

FESTO 8069731 Integrierter Antrieb

EMCA-EC-67-S-1TM-EC

Ähnliche Produkte

über uns SP SpareParts

Bleiben Sie auf dem Laufenden

Lagerbestand	Angebot anfordern
Teilenummer	8069731
Hersteller	FESTO