FESTO 533483 halbrotierender Antrieb

Name: 533483 FESTO
Brand: FESTO
SKU: 680553-de-eur
Price: 280.96 EUR
Availability: InStock

DAPS-0015-090-RS4-F04

280,96 € ~~366,58 €~~ -23%

2 Stk. mit 1 bis 3 Tagen Lieferzeit nach United States

Technische Daten

Baureihe (DAPS)	Semi-rotary drive
Size of valve actuator (0015)	15
Schwenkwinkel (090)	90
Closing direction (R)	Closes to the right
Funktion (S)	Single-acting, pushing
Spring force (4)	For connecting pressure of 5.6 bar

Werkstoffnummer Welle		1,43
Werkstoff Schrauben		High-alloy steel
Werkstoff Dichtungen		FPM NBR PUR
Werkstoff-Hinweis		RoHS-compliant
Shaft connection		T11
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°		0,63 l
Spring return torque at 90° swivel angle		15 Nm
Spring return torque at 0° swivel angle		10 Nm
Torque at nominal operating pressure and 90° swivel angle		10 Nm
Torque at nominal operating pressure and 0° swivel angle		15 Nm
Korrosionsbeständigkeitsklasse KBK		3 - high corrosion stress
Betriebsmedium		Compressed air to ISO 8573-1:2010 [7:4:4]
Ex-Zündschutzart Staub		Ex h IIIC T85°C...T200°C Db X
ATEX-Kategorie Staub		II 2D
Explosionsschutz		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE-Zeichen (siehe Konformitätserklärung)		To EU Explosion Protection Directive (ATEX)
Betriebsdruck		5,6 bar ... 8,4 bar
Safety Integrity Level (SIL)		Up to SIL 2 High Demand mode To SIL 2 Low Demand mode
Symbol		00991266
Positionserkennung		Without
Funktionsweise		Single-acting
Dämpfung		No cushioning
Note on end-position adjusting range		One end position optionally adjustable
End-position adjustment range at nominal swivel angle		81 deg ... 91 deg
Schwenkwinkel		90 deg
Size of valve actuator		15

Werkstoff Welle		High-alloy steel
Werkstoff Gehäuse		Wrought aluminium alloy
Werkstoff Deckel		Wrought aluminium alloy
Pneumatischer Anschluss		G1/8
Produktgewicht		1.200 g
Spring strength		4
Spring return torque at 50° swivel angle		7,5 Nm
Note on torque		The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Torque at nominal operating pressure and 50° swivel angle		7,5 Nm
Umgebungstemperatur		-20 °C ... 80 °C
Hinweis zum Betriebs-/Steuermedium		Lubricated operation possible (in which case lubricated operation will always be required)
Ex-Umgebungstemperatur		-20°C <= Ta <= +60°C
Ex-Zündschutzart Gas		Ex h IIC T6...T3 Gb X
ATEX-Kategorie Gas		II 2G
CE marking (see declaration of conformity)		To UK EX instructions
Nennbetriebsdruck		5,6 bar
Supply pressure for spring strength		5,6 bar
Valve connection conforms to standard		VDI/VDE 3845 (NAMUR)
Closing direction		Closes to the right
Konstruktiver Aufbau		Scotch yoke system
Einbaulage		optional
Fitting connection conforms to standard		ISO 5211
Shaft connection depth		13,2 mm
End-position adjustment range at 0°		-1 deg ... 9 deg
Flanschbohrbild		F04