| pumps | 2.48 cid servo pump | ||
| input shaft rotation | r : right hand rotation (cw) | ||
| output shaft | f : 11 tooth 16/32 internal, dia 19.33 [.761], accepts shaft ext 31.8 [1.25] | ||
| charge pump | 2 : 13.8 cm3/r [.84 in3/r] with 1.3125-12 un-2b sae o-ring port for suction inlet (s) | ||
| auxiliary port size and location | d : .750-16 unf-2b sae o-ring port - left (c1) & right (c2) sides (housing), left side plugged | ||
| main ports size and location | 6 : 1.0625-12 un-2b sae o-ring port (a & b) - right side | ||
| relief valve setting for main port b | y : 379.2 bar [5500 lbf/in2] | ||
| destroke valve | 0 : not required | ||
| control servo orifice (s1 and s2) | 0 : no control servo orifice | ||
| paint | 0b : black per spec 209-13b | ||
| design code | d : d | ||
| special features | cu |
| code title | aaf : 40.6 cm3/r [2.48 in3/r] servo controlled variable displacement pump (rear tandem) | ||
| input shaft | b : 41 tooth 48/96 ext, dia 22.22 [.875], shaft ext 24.4 [.96] | ||
| auxiliary mounting features (rear) | e : [2-bolt a] sae flange series 82-2, with mounting holes | ||
| charge pump relief setting and routing | 3 : 17.24-20.68 bar [250-300 lbf/in2] relieved to case | ||
| drain port size and location | z : thru drain into rear auxiliary flange (d3), thru drain into front mount (d4) (front tandem unit must have external drain) | ||
| relief valve setting for main port a | y : 379.2 bar [5500 lbf/in2] | ||
| Zusatzfunktionen | 0 : no additional functions | ||
| control supply orifice (p) | 0 : no control supply orifice | ||
| special control options | 0 : no special control options | ||
| identification | 0 : standard | ||
| control assembly | mm |
