| Working stroke | 900 mm | ||
| Stroke reserve | 0 mm | ||
| Spindle diameter | 15 mm | ||
| Einbaulage | optional | ||
| Konstruktiver Aufbau | Electromechanical linear axis With ball screw | ||
| Spindle type | Ball screw | ||
| Varianten | Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. | ||
| Drehzahl max. | 3.000 rpm | ||
| Wiederholgenauigkeit | ±0.02 mm | ||
| LABS-Konformität | VDMA24364 zone III | ||
| Reinraumklasse | Class 6 according to ISO 14644-1 | ||
| Umgebungstemperatur | 0 °C ... 50 °C | ||
| 2nd moment of area Iy | 631.000 mm⁴ | ||
| Idle torque at vmax | 0,2 Nm | ||
| Max. Kraft Fy | 4.710 N | ||
| Fy at theoretical life value of 100 km (only guide consideration) | 17.352 N | ||
| Max. Moment Mx | 65 Nm | ||
| Max. Moment Mz | 51 Nm | ||
| My at theoretical life value of 100 km (only guide consideration) | 188 Nm | ||
| Max. radial force at drive shaft | 290 N | ||
| Torsional mass moment of inertia It | 151.000 mm⁴ | ||
| Mass moment of inertia JL per kg of working load | 0,101 kgcm² | ||
| Feed constant | 20 mm/U | ||
| Produktgewicht | 13.562 g | ||
| Gewichtszuschlag pro 10 mm Hub | 104 g | ||
| Static deflection (load in standstill) | 0.1% of the axis length | ||
| Material end cap | Painted die cast aluminium | ||
| Werkstoff-Hinweis | RoHS-compliant | ||
| Material guide slide | Steel | ||
| Material slide | Anodised wrought aluminium alloy | ||
| Material spindle | Steel |
| Baugröße | 90 | ||
| Reversing backlash theoretical | ≤ 0,15 µm | ||
| Spindle pitch | 20 mm/U | ||
| Führung | Recirculating ball bearing guide | ||
| Type of motor | Stepper motor Servo motor | ||
| Symbol | 00991211 | ||
| Max. acceleration | 15 m/s² | ||
| Max. Geschwindigkeit | 1 m/s | ||
| Einschaltdauer | 100% | ||
| Eignung zur Produktion von Li-Ionen Batterien | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
| Schutzart | IP20 | ||
| Continuous feed force | 810 N | ||
| 2nd moment of area Iz | 1.948.000 mm⁴ | ||
| Idle torque at vmin | 0,04 Nm | ||
| Max. Kraft Fz | 5.600 N | ||
| Fz at theoretical life value of 100 km (only guide consideration) | 20.631 N | ||
| Max. Moment My | 51 Nm | ||
| Mx at theoretical life value of 100 km (only guide consideration) | 239 Nm | ||
| Mz at theoretical life value of 100 km (only guide consideration) | 188 Nm | ||
| Max. feed force Fx | 810 N | ||
| Mass moment of inertia JH per metre of stroke | 0,252 kgcm² | ||
| Mass moment of inertia JO | 0,229 kgcm² | ||
| Bewegte Masse | 1.645 g | ||
| Grundgewicht bei 0 mm Hub | 4.353 g | ||
| Dynamic deflection (moving load) | 0.05% of the axis length, max. 0.5 mm | ||
| Interface code, actuator | T46 | ||
| Material profile | Anodised wrought aluminium alloy | ||
| Material drive cover | Painted die cast aluminium | ||
| Material guide rail | Steel | ||
| Material spindle nut | Steel |
