FESTO 8063369 dispense head

Name: 8063369 FESTO
Brand: FESTO
SKU: 678191-en-eur
Price: 589.59 EUR
Availability: InStock

VTOE-D7-T3-M22C-08-V-S-PC-S

589.59 €

1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (VTOE)	Dispense head
Valve positions	1 valve position
Output connection (D7)	Nozzle, length 30 mm, nominal size 0.32 mm
Input connection (T3)	For tubing 3 mm
Valve function (M22C)	2/2-way valve, normally closed

Nominal width (08)	0.8 mm
Diaphragm and sealing material (V)	FPM
Housing material (S)	PPS
Manifold block material (PC)	Polycarbonate
Valve control (S)	Individual connection, electric, with ﬂ ying leads, 0.2 m

Pollution degree		2
Nominal altitude of use		<= 2000 m NHN
Material in contact with the medium		ETFE FPM PC PEEK PPS High-alloy stainless steel
Material number of dosing needle		1.43
Note on fluid connection		Fitting enclosed for tubing with 3 mm outside diameter
Type of mounting		Via female thread and centring sleeve
Wire ends		Sheath removed
Electrical connection		2-wire Cable Open end
Ambient temperature		5 °C ... 40 °C
Degree of protection		IP30
Storage temperature		-20 °C ... 70 °C
Corrosion resistance class CRC		0 - No corrosion stress
Vibration resistance		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Note on the medium		Observe resistance of materials that come into contact with the media
Permissible voltage fluctuations		+/- 10 %
Electrical power consumption		1,8 W
Note on switching time off		Depends on configuration, environment and application
Note on switching time on		Depends on configuration, environment and application
Note on switching frequency		Dependent on the ambient temperature and installation state
Note on dosing precision		Depends on configuration, environment and application
Note on dosing volume		Depends on configuration, environment and application
Water flow rate at max. operating pressure		370 µl/s
Type of reset		Mechanical spring
Sealing principle		Soft
Length of dosing needle		30 mm
Nominal size		0,8 mm
Operating pressure		0 psi ... 7,25 psi

Relative air humidity		0 - 95% Non-condensing
Type of actuation		Electric
Note on materials		RoHS-compliant
Material of dosing needle		High-alloy stainless steel
Fluid connection		UNF1/4-28
Conductor nominal cross section		AWG28
Cable length		0,15 m
Product weight		18 g
Note on degree of protection		In assembled state
Media temperature		5 °C ... 50 °C
LABS (PWIS) conformity		VDMA24364-B2-L
Shock resistance		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Instructions on use		See application note (available on the Support Portal at festo.com)
Medium		Liquid media
Nominal operating voltage DC		24 V
Duty cycle		100% with individual mounting 50% in case of block mounting (max. switch-on time 1 s)
Switching time off		2 ms
Switching time on		7 ms
Max. switching frequency		4 Hz
Typical dosing precision		<1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Min. dosing volume		1 µl
Type of piloting		Direct
Mounting position		optional
Grid dimension		9 mm
Nominal width of dosing needle		0,32 mm
Internal volume		113 µl valve with fluid connections
Valve function		2/2-way, closed, monostable