FESTO 8063372 dispense head

VTOE-D7-T3-M22C-08-F-P-P-S

656.72 €
1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (VTOE) Dispense head
Valve positions 1 valve position
Output connection (D7) Nozzle, length 30 mm, nominal size 0.32 mm
Input connection (T3) For tubing 3 mm
Valve function (M22C) 2/2-way valve, normally closed
Nominal width (08) 0.8 mm
Diaphragm and sealing material (F) FFPM
Housing material (P) PEEK
Manifold block material (P) PEEK
Valve control (S) Individual connection, electric, with fl ying leads, 0.2 m
Pollution degree 2
Nominal altitude of use <= 2000 m NHN
Material in contact with the medium ETFE FFPM PEEK High-alloy stainless steel
Material number of dosing needle 1.43
Note on fluid connection Fitting enclosed for tubing with 3 mm outside diameter
Type of mounting Via female thread and centring sleeve
Wire ends Sheath removed
Electrical connection 2-wire Cable Open end
Ambient temperature 5 °C ... 40 °C
Degree of protection IP30
Storage temperature -20 °C ... 70 °C
Corrosion resistance class CRC 0 - No corrosion stress
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Note on the medium Observe resistance of materials that come into contact with the media
Permissible voltage fluctuations +/- 10 %
Electrical power consumption 1,8 W
Note on switching time off Depends on configuration, environment and application
Note on switching time on Depends on configuration, environment and application
Note on switching frequency Dependent on the ambient temperature and installation state
Note on dosing precision Depends on configuration, environment and application
Note on dosing volume Depends on configuration, environment and application
Water flow rate at max. operating pressure 370 µl/s
Type of reset Mechanical spring
Sealing principle Soft
Length of dosing needle 30 mm
Nominal size 0,8 mm
Operating pressure 0 psi ... 7,25 psi
Relative air humidity 0 - 95% Non-condensing
Type of actuation Electric
Note on materials RoHS-compliant
Material of dosing needle High-alloy stainless steel
Fluid connection UNF1/4-28
Conductor nominal cross section AWG28
Cable length 0,15 m
Product weight 18 g
Note on degree of protection In assembled state
Media temperature 5 °C ... 50 °C
LABS (PWIS) conformity VDMA24364-B2-L
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Instructions on use See application note (available on the Support Portal at festo.com)
Medium Liquid media
Nominal operating voltage DC 24 V
Duty cycle 100% with individual mounting 50% in case of block mounting (max. switch-on time 1 s)
Switching time off 2 ms
Switching time on 7 ms
Max. switching frequency 4 Hz
Typical dosing precision <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Min. dosing volume 1 µl
Type of piloting Direct
Mounting position optional
Grid dimension 9 mm
Nominal width of dosing needle 0,32 mm
Internal volume 113 µl valve with fluid connections
Valve function 2/2-way, closed, monostable
656.72 €
Stock 1 pcs.
Part number 8063372
Manufacturer FESTO
Quantity Unit Price
1+ 656.72 €

  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies