| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Housing colour | Black | ||
| Product weight | 98 g | ||
| Approval | RCM trademark | ||
| Degree of protection | IP20 | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| Electrical connection output, function | Switching output | ||
| Electrical connection output, connection pattern | 00997304 | ||
| Electrical connection output, connector system | Spring-loaded terminal | ||
| Ethernet interface, connection pattern | 00995789 | ||
| Ethernet interface, function | Parameterisation and commissioning | ||
| Ethernet interface, connection system | RJ45 | ||
| Communication interface, galvanic isolation | no | ||
| Communication interface, protocol | ASCII via RS232 | ||
| Communication interface, plug pattern | 00991872 | ||
| Communication interface, connection technology | M8x1, A-coded according to EN 61076-2-104 | ||
| Power supply, connection pattern | 00997301 | ||
| power supply, connection system | Circuit board connector, contact spacing 3.5 mm | ||
| Power supply, function | Digital trigger input Power supply | ||
| Pollution degree | 2 | ||
| Time resolution | 0,2 ms | ||
| Holding current, total | ≤ 1,8 A | ||
| Holding current, per output | 20 mA ... 400 mA | ||
| Max. number of outputs | 8 | ||
| Trigger level | Level 14 V ... 24 V | ||
| Operator controls | DIP switch for Baud rate | ||
| Parameterisation | Parameter setting per output | ||
| Diagnostics via bus | Wire break at the output Short circuit/overload at output Parameterisation error Undervoltage in load supply | ||
| Dimensions (W x L x H) | 92 mm x 100 mm x 28 mm |
| Material housing | PA | ||
| Type of mounting | With through-hole | ||
| Nominal altitude of use | <= 2000 m NHN | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Relative air humidity | 0 - 95% Non-condensing | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| CE mark (see declaration of conformity) | To EU EMC Directive To EU Low Voltage Directive | ||
| Electrical connection for output, conductor cross section | 0,08 mm² ... 0,5 mm² | ||
| Electrical connection output, number of connections/cores | 8 | ||
| Electrical connection output, connection type | 2x terminal strip | ||
| Ethernet interface, protocol | Modbus® TCP | ||
| Ethernet interface, transmission rate | 10/100 Mbit/s | ||
| Ethernet interface, connection type | Socket | ||
| Communication interface, transmission rate | 9.6 - 115.2 kBd | ||
| Communication interface, function | Parameterisation and commissioning | ||
| Communication interface, number of pins/wires | 4 | ||
| Communication interface, connection type | Socket | ||
| Power supply, number of pins/wires | 5 | ||
| Power supply, connection type | Plugs | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| Nominal operating voltage DC | 24 V | ||
| Inrush time | ≤ 100 ms | ||
| Inrush current, total | ≤ 4 A | ||
| Inrush current, per output | 20 mA ... 1.000 mA | ||
| Load voltage range DC | 8 V ... 24 V | ||
| Internal current consumption, operating voltage | 36 mA | ||
| Reverse polarity protection | For operating voltage | ||
| Mounting position | optional | ||
| Diagnostics via LED | Error Run |
