| A | 48 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 30 mm ±0.05 | ||
| M1 | 10 | ||
| O2 (ISO 4762-8.8 oder ISO 4017-8.8, only applicable for bolting with steel or cast iron threads. ) | M5x16 | ||
| T | 7 | mm | |
| U2 (DIN 125) | 5 | mm |
| e | 33 | ||
| m | 7 | ||
| O1 (ISO 4762-8.8) | M5x25 | ||
| T (For general requirements.) | 150 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 5 | mm | |
| V | 5 | mm |
| L | 600 | mm | |
| m | 0.74 | kg |
| Tolerance for L | - 500 µm - 1500 µm |
