| V | 50 | mm | |
| e | 29 | ||
| m | 5.80 | ||
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M4x12 | ||
| T | 4.50 | mm | |
| V | 5 | mm |
| A | 40 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 22 mm ±0.01 | ||
| O1 (DIN 6912-8.8) | M4x20 | ||
| T (For general requirements.) | 120 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 4 | mm |
| L | 600 | mm | |
| m | 0.52 | kg |
| Tolerance for L | - 500 µm - 1500 µm |
