a)
Reference edge
b)
Hole pattern:
c)
Length
| m | 13 mm -0.5 | ||
| A2 | 68 | mm | |
| A3 | 34 mm ±0.02 | ||
| H3 (Tolerance: ±0.02 mm; comes with a height grade of 20 µm.) | 33 | mm | |
| H4 | 48 | mm | |
| m | 13 | ||
| O2 (DIN 7984-8.8) | M10 | ||
| T1 | 9 | mm | |
| Tolerance for H3 (Shaft diameters 30 to 50: Up to 1,800 mm length with parallelism of 10 µm available upon request ,Measured with gauging shaft, nominal dimension d and length about 50 mm.) | ± 20 | ||
| V | 11 | mm |
| N | 17 | mm | |
| A3 | 34 | mm | |
| e | 46 | ||
| H3 | 33 mm | ||
| H4 | 48 mm | ||
| O1 (DIN 6912-8.8) | M10x25 | ||
| T | 60 | mm | |
| T2 | 6.80 | mm | |
| Tolerance for H4 shaft included h6 (Includes shaft tolerance (determined from statistics).) | ± 29 | ||
| V1 | 6 | mm |
| m | 12.30 | kg |
