| Material spindle | Rolled steel | ||
| Material piston rod | High-alloy stainless steel | ||
| Note on materials | RoHS-compliant | ||
| Logic interface, plug pattern | 00992264 | ||
| Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 | ||
| Switching logic for inputs | NPN (negative switching) PNP (positive switching) | ||
| Max. cable length | 15 m outputs 15 m inputs 20 m with IO-Link® operation | ||
| IO-Link, Min. cycle time | 1 ms | ||
| IO-Link, Process data content IN | 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out) | ||
| IO-Link, Process data content OUT | 1-bit (move in) 1-bit (move out) 1-bit (quit error) | ||
| IO-Link, Number of ports | 1 | ||
| IO-Link, communication mode | COM3 (230.4 kBaud) | ||
| IO-Link, SIO-Mode support | Yes | ||
| Working range of logic input | 24 V | ||
| Number of digital logic inputs | 2 | ||
| Additional weight per 10 mm stroke | 41 g | ||
| Product weight | 2.415 g | ||
| Moving mass for 0 mm stroke | 179 g | ||
| Reference value effective load, horizontal | 60 kg | ||
| Max. radial force at drive shaft | 180 N | ||
| Max. moment My | 2,9 Nm | ||
| Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C. | ||
| Degree of protection | IP40 | ||
| Storage temperature | -20 °C ... 60 °C | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Approval | RCM trademark | ||
| Power supply, number of pins/wires | 4 | ||
| Power supply, connection type | Plugs | ||
| Rotor position transducer resolution | 16 bit | ||
| Nominal current | 3 A | ||
| Max. current consumption | 3.000 mA | ||
| Insulation protection class | B | ||
| Features of digital logic outputs | Configurable Not galvanically isolated | ||
| Max. speed | 0,074 m/s | ||
| Ready status indication | LED | ||
| Additional functions | User interface Integrated end-position sensing | ||
| Rotor position sensor | Absolute single-turn encoder | ||
| Protection against torque/guide | With plain-bearing guide | ||
| Spindle type | Ball screw drive | ||
| Type of motor | Stepper motor | ||
| Mounting position | optional | ||
| Spindle pitch | 3 mm/U | ||
| Reversing backlash theoretical | 100 µm | ||
| Stroke reserve | 0 mm | ||
| Size | 45 |
| Material spindle nut | Steel | ||
| Material housing | Smooth-anodised wrought aluminium alloy | ||
| Type of mounting | Via female thread With accessories | ||
| Logic interface, number of pins/wires | 8 | ||
| Logic interface, connection type | Plug | ||
| Switching logic for outputs | NPN (negative switching) PNP (positive switching) | ||
| IO-Link, Data storage required | 500 Byte | ||
| IO-Link, Service data IN | 32-bit force 32-bit position 32-bit speed | ||
| IO-Link, Process data length IN | 2 bytes | ||
| IO-Link, Process data length OUT | 2 bytes | ||
| IO-Link, Port class | A | ||
| IO-Link, Protocol version | Device V 1.1 | ||
| Features of logic input | Configurable Not galvanically isolated | ||
| Specification logic input | Based on IEC 61131-2, type 1 | ||
| Number of digital logic outputs 24 V DC | 2 | ||
| Basic weight for 0 mm stroke | 1.185 g | ||
| Additional moving mass per 10 mm stroke | 4,9 g | ||
| Reference value effective load, vertical | 23 kg | ||
| Max. feed force Fx | 450 N | ||
| Max. moment Mz | 2,9 Nm | ||
| Max. moment Mx | 0 Nm | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Relative air humidity | 0 - 90% Non-condensing | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| KC mark | KC-EMV | ||
| Power supply, connection pattern | 00995989 | ||
| power supply, connection system | M12x1, T-coded according to EN 61076-2-111 | ||
| Permissible voltage fluctuations | +/- 15% | ||
| Parameterisation interface | IO-Link User interface | ||
| Nominal voltage DC | 24 V | ||
| Max. current digital logic outputs | 100 mA | ||
| Duty cycle | 100% | ||
| Repetition accuracy | ±0.02 mm | ||
| Max. acceleration | 1,5 m/s² | ||
| Display | LED | ||
| Rotor position sensor, encoder measuring principle | Magnetic | ||
| Referencing | Positive fixed stop block Negative fixed stop block Reference switch | ||
| Symbol | 00997294 | ||
| Design | Electric cylinder With ball screw drive With integrated drive | ||
| Piston-rod end | Male thread | ||
| Torsional backlash at piston rod +/- | 1 deg | ||
| Spindle diameter | 10 mm | ||
| Piston rod thread | M10x1.25 | ||
| Stroke | 300 mm |
Cookies are small text files that can enhance a user's experience on websites
The law stipulates that we can store strictly necessary cookies on your device for the proper functioning of this site. For other types of cookies, we require your permission. This means necessary cookies are processed under GDPR Art. 6 (1) (f), while all other cookies, such as those in the preferences and marketing categories, are processed under GDPR Art. 6 (1) (a) GDPR.
cookies.cookies_about_type
You have the option to change or withdraw your consent at any time through the Cookie Declaration on our website.
Find more information about our identity, how to contact us, and our personal data processing practices in our Privacy Policy.
