| Mean time to dangerous failure (MTTFd), subcomponent | 380 years, rotor position sensor | ||
| Switching cycles holding brake | 10 million idle actuations (without friction work!) | ||
| Brake max. friction work | 5.600 J | ||
| DC brake response delay | ≤ 2 ms | ||
| Brake separation time | ≤ 35 ms | ||
| Brake coil resistance | 52,4 Ohm | ||
| Brake current consumption | 0,46 A | ||
| Brake holding torque | 2,5 Nm | ||
| Rotor position transducer resolution | 19 bit | ||
| rotor position sensor, DC operating voltage range | 3,6 V ... 14 V | ||
| Rotor position sensor, encoder measuring principle | Inductive | ||
| rotor position sensor, absolute detectable revolutions | 4.10 | ||
| Rotor position sensor | Absolute multi-turn encoder | ||
| Permissible axial shaft load | 70 N | ||
| Total mass moment of inertia of output | 0,373 kgcm² | ||
| Thermal resistance | 1,3 K/W | ||
| Electric time constant | 2,7 ms | ||
| Winding longitudinal inductivity Ld (phase) | 8 mH | ||
| Phase-phase winding resistance | 4,85 Ohm | ||
| Standstill torque constant | 0,53 Nm/A | ||
| Peak current | 11 A | ||
| Continuous stall current | 2,5 A | ||
| Max. mechanical speed | 16.000 rpm | ||
| Nominal rotary speed | 3.000 rpm | ||
| Nominal torque | 1 Nm | ||
| Number of pole pairs | 5 | ||
| Nominal operating voltage DC | 565 V | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions | ||
| Approval | RCM trademark c UL us - Recognized (OL) | ||
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Pollution degree | 2 | ||
| Electrical connection 1, number of connections/cores | 15 | ||
| Electrical connection 1, connection type | Hybrid plug | ||
| Storage lifetime under nominal conditions | 20.000 h | ||
| Balance quality | G 2.5 | ||
| Note on degree of protection | IP40 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components | ||
| Mounting position | optional | ||
| Temperature monitoring | Digital motor temperature transmission via EnDat® 2.2 | ||
| Max. winding temperature | 155 °C | ||
| Conforms to standard | IEC 60034 | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Max. installation height | 4.000 m | ||
| Ambient temperature | -15 °C ... 40 °C |
| Mean time to failure (MTTF), subcomponent | 190 years, rotor position sensor | ||
| Mass moment of inertia of brake | 0,074 kgcm² | ||
| Max. brake no-load speed | 10.000 rpm | ||
| Brake closing time | 10 ms | ||
| Brake coil inductivity | 700 mH | ||
| Power consumption, brake | 11 W | ||
| Operating voltage DC for brake | 24 V | ||
| rotor position sensor, system accuracy of angle measurement | -120 arcsec ... 120 arcsec | ||
| rotor position sensor, position values per revolution | 524.288 | ||
| rotor position sensor, DC operating voltage | 5 V | ||
| Rotor position encoder interface | EnDat® 22 | ||
| rotor position sensor, manufacturer designation | EQI 1131 | ||
| Permissible radial shaft load | 350 N | ||
| Product weight | 1.850 g | ||
| Measuring flange | 250 x 250 x 15 mm, steel | ||
| Thermal time constant | 42 min | ||
| Winding cross inductivity Lq (phase) | 10 mH | ||
| Phase-phase winding inductance | 20 mH | ||
| Voltage constant, phase-to-phase | 32 mVmin | ||
| Motor constant | 0,45 Nm/A | ||
| Nominal motor current | 2,2 A | ||
| Nominal power rating of motor | 310 W | ||
| Max. rotational speed | 11.800 rpm | ||
| Peak torque | 3,4 Nm | ||
| Standstill torque | 1,15 Nm | ||
| Type of winding switch | Star inside | ||
| Certificate issuing authority | UL E342973 | ||
| CE mark (see declaration of conformity) | To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Note on materials | RoHS-compliant | ||
| Electrical connection 1, connection pattern | 00995913 | ||
| Electrical connection 1, connector system | M23x1 | ||
| Interface code, motor out | 60P | ||
| Detent torque | <1.0% of the peak torque | ||
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N | ||
| Degree of protection | IP40 | ||
| Motor type to EN 60034-7 | IM B5 IM V1 IM V3 | ||
| Rating class as per EN 60034-1 | S1 | ||
| Temperature class as per EN 60034-1 | F | ||
| Relative air humidity | 0 - 90% | ||
| Note on max. installation height | As of 1,000 m: only with derating of -1.0% per 100 m | ||
| Note on ambient temperature | Up to 80°C with derating of -1.5% per degree Celsius |
Cookies are small text files that can enhance a user's experience on websites
The law stipulates that we can store strictly necessary cookies on your device for the proper functioning of this site. For other types of cookies, we require your permission. This means necessary cookies are processed under GDPR Art. 6 (1) (f), while all other cookies, such as those in the preferences and marketing categories, are processed under GDPR Art. 6 (1) (a) GDPR.
cookies.cookies_about_type
You have the option to change or withdraw your consent at any time through the Cookie Declaration on our website.
Find more information about our identity, how to contact us, and our personal data processing practices in our Privacy Policy.
